Changes between Version 8 and Version 9 of campuswifiandeduroam2023Agenda/WiFi-Lab

Timestamp:

Jul 29, 2024, 12:32:28 AM (8 weeks ago)

Author:

admin

Comment:

--

campuswifiandeduroam2023Agenda/WiFi-Lab

@@ -46 +46 @@
 [[Image(https://ws.learn.ac.lk/raw-attachment/wiki/campuswifiandeduroam2023Agenda/WiFi-Lab/wifilab7.png, 480px)]]
 
+ Now you are able login to the AP through a web console. Enter ​https://<AP_IP_address>:4343/ on a browser. Credentials will be as follows.
+
+user : admin password : serial number of the AP 
+
 == Initial setup of AP-225 ==
 
@@ -75 +79 @@
 password : serial number of the AP
 
+
+= System Configurations =
+
+After the initial setup let us do some basic system configurations.
+
+Go to Configuration => System. In general section you change some important settings. Change settings like Name, System Location, NTP server, Timezone settings and save.
+
+[[Image(https://ws.learn.ac.lk/raw-attachment/wiki/campuswifiandeduroam2023Agenda/WiFi-Lab/wifilab9.png, 480px)]]
+
+Go to Admin section and create the view only user as below with a password. This user will have Dashboard monitoring capabilities and not any configuration and maintenance.
+
+[[Image(https://ws.learn.ac.lk/raw-attachment/wiki/campuswifiandeduroam2023Agenda/WiFi-Lab/wifilab9.png, 480px)]]
+
+= Setting UP SSIDs =
+
+login using admin:admin or admin/serialno. Locate Network, Click new. Go through the wizard.
+
+
 = Setting up a DHCP server =
 
@@ -95 +117 @@
 }}}
 
-= Setting UP SSIDs =
-
-login using admin:admin or admin/serialno. Locate Network, Click new. Go through the wizard.
-1) Enter ssid, 
-2) We will assign VC as the DHCP server.
-        Client IP assignement : virtual controller managed
-        Client VLAN assignment : custom and select the above created(WS).
-
-3) click the slider bar to Enterprise security level,
-key management : WPA-2 Enterprise
-Authentication server : new
-        enter the radius server ip and secret configured in /etc/freeradius/clients
-        Radius IP address : 192.248.4.XXX
-Also make sure AP addresses are added as clients to radius server.
-4) keep the network Access unrestricted
 
 = Add other Access Points =