Changes between Version 16 and Version 17 of TutorialSetupLXC

Timestamp:

Feb 18, 2020, 5:13:07 AM (4 years ago)

Author:

admin

Comment:

--

TutorialSetupLXC

@@ -100 +100 @@
 }}}
 
-* Next step is to apply network configuration. Before applying please verify the configuration with an instructor. Applying with wrong configuration will DISCONNECT you from the SSH connection so that you are unable to connect again from the Workshop. Once network configuration is verified enter `sudo netplan apply`. ( You can also try `sudo netplay try` command verify the network configuration. Once you enter this command configuration will be applied for 120 seconds
-and roll back.Meanwhile you can test network connection using `ping` by opening another terminal window. Don't ENTER until you satisfy with the new configuration.  If you want to roll back configuration earlier type Ctrl + C )
+* Next step is to apply network configuration. Before applying please verify the configuration with an instructor. Applying with wrong configuration will DISCONNECT you from the SSH connection so that you are unable to connect again from the Workshop. Once network configuration is verified enter `sudo netplan apply`. ( You can also try `sudo netplay try` command verify the network configuration. Once you enter this command configuration will be applied for 120 seconds and roll back.Meanwhile you can test network connection using `ping` by opening another terminal window. Don't ENTER until you satisfy with the new configuration.  If you want to roll back configuration earlier type Ctrl + C )
  
   (If you see any error, please check the yaml file. Do not reboot under any circumstances if you are connected via SSH )