Changes between Version 7 and Version 8 of Nmm2022/Agenda/perfSONARsetup

Timestamp:

Jul 15, 2022, 2:32:47 PM (2 years ago)

Author:

admin

Comment:

--

Nmm2022/Agenda/perfSONARsetup

@@ -83 +83 @@
 There are some perfSONAR host configurations to be done before we proceeding with network measurements. For that click on the configuration on top of the page. You will be promted for a user login. Please provide the credentials we created earlier. 
 
-There are three tabs and first we will fill Administrative information. Please fill the fields appropriately and it should be like below.
+There are three tabs and first we will fill Administrative information. Please fill the fields appropriately and it should be like below. Once done click on Save to apply the configurations.
 
 [[Image(https://ws.learn.ac.lk/raw-attachment/wiki/Nmm2022/Agenda/perfSONARsetup/ps13.png)]]
 
-Once done click on Save to apply the configurations.
+Then go back to the Dashboard and see the Host Information section on the right side. It could be like below.
+
+[[Image(https://ws.learn.ac.lk/raw-attachment/wiki/Nmm2022/Agenda/perfSONARsetup/ps14.png)]]
+
+If the NTP Synced is No then go back to Configuration and to the second tab Host. In this tab Network Time Protocol (NTP) servers are configured for the node. Global time syncing is very important to network measurements to be accurate. So we must make sure that NTP Synced status is always Yes.
+
+[[Image(https://ws.learn.ac.lk/raw-attachment/wiki/Nmm2022/Agenda/perfSONARsetup/ps15.png)]]
+
+Click on "Select the closest servers" to update NTP server listed and check again whether NTP Synced status has come to Yes value.