= VM Installation = ''' Please do not continue if you machine doesn't have memory less than 4GB ''' === Setting up VM's === * You may download ova file from [ftp://192.248.6.201/IAM_Appliance.ova ​here]. * Update your Oracle Virtual Box to be the latest from [https://www.virtualbox.org/wiki/Downloads here] * Import them in to Oracle virtual box from File Import Appliance * While importing make sure to Tick reinitialize the MAC address of all your network cards. * This will import two Virtual Machines as IDP and SP. * Before powering on them, please double check your vm network connection to be bridged with your active network connection. * If all settings are satisfying, power on both Virtual Machines. === Log in to the VM === Login credentials of both VM's are as follows. user: adminiam pass: iam@2018 === Setting UP IP Addresses for IDP === After you start the VM change the IP address. You can find your IDP IP address from here Run the commands below to create a new network configuration file {{{ sudo vi /etc/netplan/50-cloud-init.yaml }}} Then you will see the following configuration {{{ # This file describes the network interfaces available on your system # For more information, see netplan(5). network: ethernets: enp0s3: addresses: - 192.248.6.XY/24 dhcp4: false gateway4: 192.248.6.254 nameservers: addresses: - 192.248.6.201 search: - instXY.ac.lk version: 2 }}} Change XY according to the IP address and the search you get from the table. Exit and save your changes by pressing esc and type :wq Restart the VM. Check the connectivity by using the '''ping''' command on some known IP address. === Setting UP IP Addresses for SP === Do the same with SP VM. You can find your SP IP address from here Run the commands below to create a new network configuration file {{{ sudo vi /etc/netplan/50-cloud-init.yaml }}} Then you will see the following configuration {{{ # This file describes the network interfaces available on your system # For more information, see netplan(5). network: ethernets: enp0s3: addresses: - 192.248.6.XY/24 dhcp4: false gateway4: 192.248.6.254 nameservers: addresses: - 192.248.6.201 search: - instXY.ac.lk version: 2 }}} Change XY according to the IP address and the search you get from the table. > Note that the XY in IP address and search are not the same. Please recheck Exit and save your changes by pressing esc and type :wq Restart the VM. Check the connectivity by using the '''ping''' command on some known IP address.