= VM Installation =

''' Please do not continue if you machine doesn't have memory less than 4GB '''

=== Setting up VM's ===

* You may download ova file from [ftp://192.248.6.201/IAM_Appliance.ova ​here]. 

* Update your Oracle Virtual Box to be the latest from [https://www.virtualbox.org/wiki/Downloads here]

* Import them in to Oracle virtual box from File Import Appliance 

* While importing make sure to Tick reinitialize the MAC address of all your network cards.

* This will import two Virtual Machines as IDP and SP. 
    
* Before powering on them, please double check your vm network connection to be bridged with your active network connection. 

* If all settings are satisfying, power on both Virtual Machines.

=== Log in to the VM ===

Login credentials of both VM's are as follows.

user: adminiam

pass: iam@2018

===  Setting UP IP Addresses for IDP ===

After you start the VM change the IP address. You can find your IDP IP address from here

Run the commands below to create a new network configuration file
{{{
sudo vi /etc/netplan/50-cloud-init.yaml
}}}

Then you will see the following configuration
{{{
# This file describes the network interfaces available on your system
# For more information, see netplan(5).
network:
    ethernets:
      enp0s3:      
         addresses: 
         - 192.248.6.XY/24
         dhcp4: false
         gateway4: 192.248.6.254
         nameservers:
             addresses: 
             - 192.248.6.201
             search:
             - instXY.ac.lk
    version: 2
}}}

Change XY according to the IP address and the search you get from the table.

Exit and save your changes by pressing esc and type :wq

Restart the VM.

Check the connectivity by using the '''ping''' command on some known IP address.

===  Setting UP IP Addresses for SP ===

Do the same with SP VM. You can find your SP IP address from here

Run the commands below to create a new network configuration file
{{{
sudo vi /etc/netplan/50-cloud-init.yaml
}}}

Then you will see the following configuration
{{{
# This file describes the network interfaces available on your system
# For more information, see netplan(5).
network:
    ethernets:
      enp0s3:      
         addresses: 
         - 192.248.6.XY/24
         dhcp4: false
         gateway4: 192.248.6.254
         nameservers:
             addresses: 
             - 192.248.6.201
             search:
             - instXY.ac.lk
    version: 2
}}}
Change XY according to the IP address and the search you get from the table.


> Note that the XY in IP address and search are not the same. Please recheck


Exit and save your changes by pressing esc and type :wq

Restart the VM.

Check the connectivity by using the '''ping''' command on some known IP address.