wiki:spiam2018

Version 1 (modified by admin, 6 years ago) ( diff )

--

Shibboleth SP on Ubuntu Linux LTS 18.04

Installation assumes you have already installed Ubuntu Server 18.04 with default configuration and has a public IP connectivity with DNS setup

Lets Assume your server hostname as sp.YOUR-DOMAIN

All commands are to be run as root and you may use sudo su to become root

  1. Install the packages required: 
  • apt install apache2 ntp ca-certificates vim openssl binutils
  1. Modify /etc/hosts: 
  • vim /etc/hosts

         127.0.0.1 sp.YOUR-DOMAIN sp

(Replace sp.YOUR-DOMAIN with your sp FQDN)

Install Shibboleth Service Provider

  1. Install dependancies to overcome issues with libcurl libraries. ( Credits: ​Josh L.'s Blog ) 
  •      apt install liblog4shib1v5 libxerces-c3.2 libxml-security-c17v5 libcurl3
     cp /usr/lib/x86_64-linux-gnu/libcurl.so.4.5.0 /usr/lib/x86_64-linux-gnu/libcurl3.so.4.5.0
     apt-get install libcurl4
     mkdir ~/temp
     cd ~/temp
     apt-get download libxmltooling7 # Ignore the warnings
     ar x libxmltooling7_1.6.4-1ubuntu2_amd64.deb
     tar xf control.tar.xz
     sed -i -e 's/libcurl3 (>= 7.16.2)/libcurl4/g' control
     tar -cJvf control.tar.xz control md5sums shlibs triggers
     ar rcs libxmltooling-local.deb debian-binary control.tar.xz data.tar.xz
     dpkg -i libxmltooling-local.deb
     mkdir /etc/systemd/system/shibd.service.d
  • Create the following script to override defaults, 
  • vim /etc/systemd/system/shibd.service.d/override.conf`

         [Service]
     Environment="LD_PRELOAD=libcurl3.so.4.5.0"

  1. Install Shibboleth SP: 
         apt install libapache2-mod-shib2 libapache2-mod-php

From this point the location of the SP directory is: /etc/shibboleth

Configuration Instructions

Configure Apache2

  1. These configurations are based for test purposes with self generated ssl certificates. If you have purchased ssl certificate from a commercial CA substitute those with the self signed files. If you wish to get letsencrypt certificates Skip to Step 10.

Create a Certificate and a Key self-signed for HTTPS:

  • openssl req -x509 -newkey rsa:4096 -keyout /etc/ssl/private/ssl-sp.key -out /etc/ssl/certs/ssl-sp.crt -nodes -days 1095
  1. Modify the file /etc/apache2/sites-available/sp-ssl.conf as follows:

`apache <IfModule mod_ssl.c>

SSLStaplingCache shmcb:/var/run/ocsp(128000) <VirtualHost _default_:443>

ServerName sp.YOUR-DOMAIN:443 ServerAdmin admin@YOUR-DOMAIN DocumentRoot /var/www/html ... SSLEngine On

SSLProtocol All -SSLv2 -SSLv3 -TLSv1 -TLSv1.1 SSLCipherSuite "EECDH+AESGCM:EDH+AESGCM:AES256+EECDH:AES256+EDH"

SSLHonorCipherOrder on

# Disable SSL Compression SSLCompression Off

# OCSP Stapling, only in httpd/apache >= 2.3.3 SSLUseStapling on SSLStaplingResponderTimeout 5 SSLStaplingReturnResponderErrors off

# Enable HTTP Strict Transport Security with a 2 year duration Header always set Strict-Transport-Security "max-age=63072000;includeSubDomains;preload" ... SSLCertificateFile /etc/ssl/certs/ssl-sp.crt SSLCertificateKeyFile /etc/ssl/private/ssl-sp.key SSLCertificateChainFile /root/certificates/ssl-ca.pem ...

</VirtualHost>

</IfModule> `

  1. Enable proxy_http, SSL and headers Apache2 modules:
    • a2enmod proxy_http ssl headers alias include negotiation
    • a2ensite sp-ssl.conf
    • systemctl restart apache2
  1. Configure Apache2 to open port 80 only for localhost:
    • vim /etc/apache2/ports.conf

`apache # If you just change the port or add more ports here, you will likely also # have to change the VirtualHost statement in # /etc/apache2/sites-enabled/000-default.conf

Listen 127.0.0.1:80

<IfModule ssl_module>

Listen 443

</IfModule>

<IfModule mod_gnutls.c>

Listen 443

</IfModule> `

  1. Configure Apache2 to redirect all on HTTPS:
    • vim /etc/apache2/sites-enabled/000-default.conf

`apache <VirtualHost *:80>

ServerName "sp.YOUR-DOMAIN" Redirect permanent "/" "​https://sp.YOUR-DOMAIN/" RedirectMatch permanent /(.*)$ ​https://sp.YOUR-DOMAIN/$1

</VirtualHost> `

  1. Let'sencrypt setup (*Skip this step if you already configured SSL with self signed or CA provided certificates*)

Disable the default configuration

  • cd /etc/apache2/sites-available/
  • a2dissite 000-default.conf
  • systemctl reload apache2

Create a new conf file as sp.conf

  • cp 000-default.conf sp.conf

Edit sp.conf with following

  • vim sp.conf

`apache <VirtualHost *:80>

ServerName sp.YOUR-DOMAIN ServerAdmin YOUR-Email DocumentRoot /var/www/html

ErrorLog ${APACHE_LOG_DIR}/error.log CustomLog ${APACHE_LOG_DIR}/access.log combined

</VirtualHost> `

Enable sp site by,

  • a2ensite sp

and restart Apache

  • systemctl reload apache2

Install Letsencypt and enable https

`bash add-apt-repository ppa:certbot/certbot apt install python-certbot-apache certbot --apache -d sp.YOUR-DOMAIN ` ` Plugins selected: Authenticator apache, Installer apache Enter email address (used for urgent renewal and security notices) (Enter 'c' to cancel): YOU@YOUR-DOMAIN

  • - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Please read the Terms of Service at ​https://letsencrypt.org/documents/LE-SA-v1.2-November-15-2017.pdf. You must agree in order to register with the ACME server at ​https://acme-v02.api.letsencrypt.org/directory

  • - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

(A)gree/(C)ancel: A

  • - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Would you be willing to share your email address with the Electronic Frontier Foundation, a founding partner of the Let's Encrypt project and the non-profit organization that develops Certbot? We'd like to send you email about our work encrypting the web, EFF news, campaigns, and ways to support digital freedom.

  • - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

(Y)es/(N)o: Y

Obtaining a new certificate Performing the following challenges: http-01 challenge for sp.YOUR_DOMAIN Waiting for verification... Cleaning up challenges Created an SSL vhost at /etc/apache2/sites-available/sp-le-ssl.conf Enabled Apache socache_shmcb module Enabled Apache ssl module Deploying Certificate to VirtualHost /etc/apache2/sites-available/sp-le-ssl.conf Enabling available site: /etc/apache2/sites-available/sp-le-ssl.conf

Please choose whether or not to redirect HTTP traffic to HTTPS, removing HTTP access.

  • - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

1: No redirect - Make no further changes to the webserver configuration. 2: Redirect - Make all requests redirect to secure HTTPS access. Choose this for new sites, or if you're confident your site works on HTTPS. You can undo this change by editing your web server's configuration.

  • - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Select the appropriate number [1-2] then [enter] (press 'c' to cancel): 2 Redirecting vhost in /etc/apache2/sites-enabled/sp.conf to ssl vhost in /etc/apache2/sites-available/sp-le-ssl.conf

  • - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Congratulations! You have successfully enabled ​https://sp.YOUR-DOMAIN

`

### Configure Shibboleth SP

  1. Download Federation Metadata Signing Certificate: (If its available)
    • cd /etc/shibboleth/
    • wget https://LEARN-Test-federation/signning-key.pem
  1. Edit shibboleth2.xml opportunely:
    • vim /etc/shibboleth/shibboleth2.xml

`bash ... <ApplicationDefaults entityID="​https://sp.YOUR-DOMAIN/shibboleth"

REMOTE_USER="eppn persistent-id targeted-id">

... <Sessions lifetime="28800" timeout="3600" checkAddress="false" handlerSSL="true" cookieProps="https"> ... <SSO discoveryProtocol="SAMLDS" discoveryURL="​https://fds-training.ac.lk">

SAML2

</SSO> ... <MetadataProvider type="XML" uri="​https://fr-training.ac.lk/rr3/metadata/federation/FR-training/metadata.xml" legacyOrgName="true" backingFilePath="test-metadata.xml" reloadInterval="600">

<!-- remove this comment if the signning key is available <MetadataFilter type="Signature" certificate="signning-key.pem"/> --> <MetadataFilter type="RequireValidUntil" maxValidityInterval="864000" />

</MetadataProvider> `

  1. Create SP metadata credentials:
    • /usr/sbin/shib-keygen
    • shibd -t /etc/shibboleth/shibboleth2.xml (Check Shibboleth configuration)
  1. Enable Shibboleth Apache2 configuration:
    • a2enmod shib2
    • systemctl reload apache2.service
  1. Now you are able to reach your Shibboleth SP Metadata on:
    • https://sp.YOUR-DOMAIN/Shibboleth.sso/Metadata (change sp.YOUR-DOMAIN to you SP full qualified domain name)
  1. Register you SP on LEARN test federation:
    • Go to https://fr-training.ac.lk/rr3/providers/sp_registration and continue registration with pasting the content of your metadata file

### Configure an example federated resouce "secure"

  1. Create the Apache2 configuration for the application:
    • sudo su -
  • vim /etc/apache2/site-available/secure.conf

`bash RedirectMatch /$ /secure

<Location /secure>

Authtype shibboleth ShibRequireSession On require valid-user

</Location> `

  1. Create the "secure" application into the DocumentRoot:
    • mkdir /var/www/html/secure
  • vim /var/www/html/secure/index.php

`html <!DOCTYPE HTML PUBLIC "-W3CDTD HTML 4.01 TransitionalEN" "​http://www.w3.org/TR/html4/loose.dtd"> <html>

<head>

<title></title> <meta name="GENERATOR" content="Quanta Plus"> <meta http-equiv="Content-Type" content="text/html; charset=utf-8">

</head> <body>

<p>

<a href="​https://YOUR-DOMAIN/privacy.html">Privacy Policy</a>

</p> <?php

foreach ($_SERVER as $key => $value){

print $key." = ".$value."<br>";

} /*foreach ($_ENV as $key => $value){

print $key." = ".$value."<br>";

} foreach ($_COOKIE as $key => $value){

print $key." = ".$value."<br>";

}*/ ?>

</body>

</html> `

  1. Install needed packages:
    • apt istall libapache2-mod-php
  • systemctl restart apache2.service

### Enable Attribute Support on Shibboleth SP

  1. Enable attribute by remove comment from the related content into "/etc/shibboleth/attribute-map.xml"

Disable First deprecated/incorrect version of persistent-id from attribute-map.xml

### Enable Single Logout

  1. Change <Logout> element in /etc/shibboleth/shibboleth2.xml. They get passed as attributes to the SAML2 LogoutInitiator that gets created by the Logout element. The fully unfolded configuration with settings identical to default is:

`xml <Logout asynchronous="true" outgoingBindings="urn:oasis:names:tc:SAML:2.0:bindings:HTTP-Redirect urn:oasis:names:tc:SAML:2.0:bindings:HTTP-POST urn:oasis:names:tc:SAML:2.0:bindings:SOAP">

SAML2 Local

</Logout> ` Setting asynchronous="false" would make the flow return back to the SP (this otherwise only happens for the SOAP binding which cannot be done asynchronously).

To initiate, create a button or link to go to a URL on the SP of the form: ​https://sp.example.org/Shibboleth.sso/Logout

The SLO would use an asynchronous message to the IdP and the flow would end at the IdP Logout page. The user would be returned to the return URL only if the SLO is done in synchronous mode and the flow returns back to the SP. To set the return URL, pass it in the return parameter as a query string to the Logout initiator - e.g.: ​https://sp.example.org/Shibboleth.sso/Logout?return=https://sp.example.org/logout-completed.html

Note: See TracWiki for help on using the wiki.