= LAMP Installation and Web hardening = LAMP is one of the most common web systems we find today. Letters L A M P stands for '''Linux''' , '''Apache''', '''MySQL''' & '''PHP'''. [[br]] From your yesterday’s work, we already have our first objective ‘L’, i.e. Linux or in our case its Ubuntu. Therefore, let’s see how to install other three and then in to some security hardening. == Setting the Hostname and FQDN == Remember this VM is a clone of your pc.userX.ws.learn.ac.lk. Therefore you have to change some settings in order to make this vm unique. === Setting up hostname === - Login to the vm. change to root user {{{ $sudo su }}} - Give your password - Edit /etc/hostname {{{ #nano /etc/hostname }}} * Change '''pc''' to '''www''' * Save and Exit - also edit /etc/hosts file to change 127.0.0.1 pc."your domain".ws.learn.ac.lk pc to 127.0.0.1 www."your domain".ws.learn.ac.lk www === IP Set up === Edit /etc/network/interfaces files to include your IP addresses in your pc - Login to the vm. change to root user {{{ $sudo su }}} - Give your password - Edit /etc/network/interfaces {{{ #vi /etc/network/interfaces }}} - Find the following line {{{ iface eth0 inet dhcp }}} '''Note''': "eth0" is the name of your virtual interface. It could also be something like "enp0s3". If so you will use that instead of eth0 - Change it to {{{ #iface eth0 inet dhcp }}} - Add the following lines (Get your ldap IP Address from [wiki:ipallocation iptable]) {{{ iface eth0 inet static address "Your www IP address" netmask 255.255.255.0 network 192.248.6.0 broadcast 192.248.6.255 gateway 192.248.6.254 dns-nameservers 192.248.1.161 dns-search yourdmain }}} When you completed the IP settings of of VM, restart the vm and then login to confirm correct IP settings. Before you get started, make sure you set up your server so that it correctly resolves its hostname to fully qualified domain name (FQDN). This will be necessary in order for your certificates to be validated by clients. check FQDN by {{{ hostname -f }}} == Prerequisites == Before we begin, we need to have a non-root user account with '''sudo''' privileges set up on your Ubuntu 16.04 LTS server clean installation.[[br]] Check whether you can ping your vm from the pc using its domain name www.'yourdomain'.ws.learn.ac.lk == Installation of Apache == Apache is a web server application that is widely used in the internet for more than 20 years and it is a well-documented piece of Free and Open Source Software managed by Apache Foundation. (https://httpd.apache.org/) Before installing we need to update our repositories. Therefore we will first add debian apache repo to our list and do a update on the list. Since we will be using sudo commands, It will ask you for your user's password as these processors will be granted root privileges. {{{ sudo add-apt-repository ppa:ondrej/apache2 }}} When Asked press ‘Enter’ to Continue. Once the ppa is imported do an update. {{{ sudo apt-get update }}} Once the repo lists are updated run, {{{ sudo apt-get install apache2 }}} When asked press '''Y''' and hit '''Enter''' to continue, and the installation will proceed. Check installed apache version details by issuing, {{{ $ apache2 -v }}} '''NOTE''': if you had installed apache2 while installing Ubuntu OS then we should update it to the latest by, {{{ sudo apt-get --only-upgrade install apache2 -y }}} Now goto your browser and type '''http://www.'your domain'.ws.learn.ac.lk''' and check whether you are able to access the apache test page. == MySQL Installation == Once the web server is installed and running we need to install a database management system to host our dynamic data. For that we use MySQL database as another popular FOSS. So to install MYSQL run, {{{ sudo apt-get install mysql-server }}} Again you will be asked to press Y to continue. During the installation process you will be asked to type in and confirm a root password for your MySQL system. Please keep in mind that MySQL root is also similar to root access of your server and therefore choose a strong and unique password, never leave it blank. As the installation completes let’s tighten some security in MySQL by running, {{{ sudo mysql_secure_installation }}} Enter your MySQL root password when asked. As the first step it will ask '''VALIDATE PASSWORD PLUGIN''' where this will make your passwords associated with databases much stronger by enforcing password restrictions. Once you click y it will give three options LOW, MEDIUM, STRONG. Then select a level of password validation. Make sure to keep in mind that if you enter 1, for the medium level, you will receive errors when attempting to set any password which does not contain numbers, upper and lowercase letters, and special characters. [[br]] Then there will be several questions asked, please enter Y for every answer and enter.[[br]] Once the script ends running we can test our MySQL instance by login in to it. {{{ mysql –u root –p }}} Enter your MySQL root password when requested. == Install PHP 7 == As the last option of LAMP lets install PHP version 7. type in, {{{ sudo apt-get -y install php7.0 libapache2-mod-php7.0 }}} the switch –y will automatically put yes on the installation process when it is prompted.[[br]] Once the installation is finished restart apache. {{{ sudo service apache2 restart }}} To check php, lets create a test php file. {{{ sudo nano /var/www/html/info.php }}} '''Note''': /var/www/html/ is the default document root for apache in Ubuntu unless you have changed it in apache configuration. Enter the following in info.php {{{ }}} Now let us call that file in a browser (e.g. http://www.'yourdomain'.ws.learn.ac.lk /info.php) If your PHP 7 is working you will see all your php server settings in a one single place. == Enabling Virtual Hosts == Create two directories on /var/www/ to host two separate web sites. {{{ sudo mkdir /var/www/web1 sudo mkdir /var/www/web2 }}} Create index pages on each directories containing following. {{{ sudo nano /var/www/web1/index.php }}} You may change the content as appropriate. {{{ Web 1

}}} Default host configuration is located in /etc/apache2/sites-available/000-default.conf which serves any requests coming to its domain name or IP address. To make other two domains work, lets create virtual host files for each domain names; {{{ sudo nano /etc/apache2/sites-available/web1.conf }}} with the following content, {{{ ServerAdmin admin@yourdomain.ws.learn.ac.lk ServerName yourdomain.ws.learn.ac.lk ServerAlias web1.yourdomain.ws.learn.ac.lk DocumentRoot /var/www/web1 ErrorLog ${APACHE_LOG_DIR}/error.log CustomLog ${APACHE_LOG_DIR}/access.log combined }}} Then create the virtual host for web2 as web2.conf on the same directory as web1.conf with the folowing. {{{ ServerAdmin admin@yourdomain.ws.learn.ac.lk ServerName yourdomain.ws.learn.ac.lk ServerAlias web2.yourdomain.ws.learn.ac.lk DocumentRoot /var/www/web2 ErrorLog ${APACHE_LOG_DIR}/error.log CustomLog ${APACHE_LOG_DIR}/access.log combined }}} Once both files are written these needs to be enabled by, {{{ sudo a2ensite web1.conf sudo a2ensite web2.conf }}} Now restart the apache. Do a nslookup for www.yourdomain.ws.learn.ac.lkand find the IP Addressof yourweb server and edit your pc host file and include following.(assume your IP is 192.248.X.X) {{{ 192.248.X.X web1.yourdomain.ws.learn.ac.lk 192.248.X.X web2.yourdomain.ws.learn.ac.lk }}} '''Note''': For Linux:host file is /etc/hosts , edit with nano as sudo.[[br]] For Windows:host file is %!SystemRoot%\System32\drivers\etc\hosts, open with Notepad in Run As Admin mode. and restart your pc’s.... check your browsers for following and see how three websites are hosted in one server. http://www.yourdomain.ws.learn.ac.lk [[br]] http://web1.yourdomain.ws.learn.ac.lk [[br]] http://web2.yourdomain.ws.learn.ac.lk [[br]] == CGI Scripts == CGI stands for Common Gateway Interface are useful for creating dynamic content on web page by transferring data from server to client. These scripts can be written in many languages such as bash, c, java, perl, python etc. [[br]] First we need to create a script firstbash.cgi in following location /usr/local/cgi-bin/ , you may need to create it as sudo. {{{ #!/bin/bash echo "Content-type: text/html" echo "" echo "My first CGI script" }}} Give the script file execute permissions {{{ sudo chmod 705 /usr/local/cgi-bin/firstbash.cgi }}} Now to add this CGI on our web2 virtual host, edit '''/etc/apache2/sites-available/web2.conf''' as follows. {{{ ServerAdmin admin@yourdomain.ws.learn.ac.lk ServerName yourdomain.ws.learn.ac.lk ServerAlias web2.yourdomain.ws.learn.ac.lk DocumentRoot /var/www/web2 Require all granted ScriptAlias /cgi-bin/ "/usr/local/cgi-bin/" Options +ExecCGI AddHandler cgi-script .cgi Require all granted ErrorLog ${APACHE_LOG_DIR}/error.log CustomLog ${APACHE_LOG_DIR}/access.log combined }}} After editing web2.conf lets enable CGI apache module and restart the server. {{{ sudo a2enmod cgi sudo systemctl reload apache2 }}} Visit following link and check-out your script. http://web2.yourdomain.ws.learn.ac.lk/cgi-bin/firstbash.cgi == Apache Hardening == - Hide Apache version details: By default, Apache displays the version of Apache web server installed with the name of the operating system. To hide this information, you need to edit /etc/apache2/conf-enabled/security.conf {{{ sudo nano /etc/apache2/conf-enabled/security.conf }}} Add/edit the following line: {{{ ServerSignature Off ServerTokens Prod TraceEnable Off }}} - Stop Directory Browsing Rename index.html in /var/www/html as index2.html and try to access web server from outside. You will see the directory Listing as now we don’t have an Index. But better stop displaying directory listing. Therefore, edit /etc/apache2/apache.conf and remove Indexes key word from any Directory listing such as, {{{ # Options Indexes FollowSymLinks Options -FollowSymLinks AllowOverride None Require all granted }}} and restart apache. Now go back to your default web portal and check the results. == file/folder permissions == When you create or modify documents under /var/www/ as sudo those files and directories will belong to root user and root group. Apache is usually run by a user www-data and www-data group in Ubuntu. Therefore, if any document belongs to root will also be published as root has higher precedence than www-data. But if some malicious content are hosted, they can also be run under root opening lot of vulnerabilities to the public. To secure publically accessible areas we can change user permissions by, {{{ sudo chown -R www-data:www-data /var/www }}} Also if we had directories that are open for users to upload content we can restrict access by modifying access modes. {{{ sudo chmod 664 /var/www/uploads }}} That will change file permissions to rw-rw-r— == Password protected Directory == When securing a directory it is a common practice we use a password to enter that path. Also in apache2 we can specify a password by creating an apache user and using .htaccess as needed. First install Apache Utiities; {{{ sudo apt-get install apache2-utils }}} On your virtual host configuration file add or modify following inside the ... . {{{ AllowOverride AuthConfig }}} Next create an authenticate user. {{{ sudo htpasswd -c /etc/apache2/.htpasswd yourname }}} This will ask you to enter a new password and conform it for the new user. If you want to add another user, try with the same command above with new username. You can view the contents of the .htpassword file by {{{ sudo cat /etc/apache2/.htpasswd }}} next we need to grant permission to www-data user. {{{ sudo chown www-data:www-data /etc/apache2/.htpasswd sudo chmod 0660 /etc/apache2/.htpasswd }}} After that create a directory called “mystuff” inside the directory web1, create an html page of your choice inside the directory as sudo and change ownership to www-data. {{{ sudo mkdir /var/www/web1/mystuff sudo nano /var/www/web1/mystuff/index.html sudo chown –R www-data:www-data /var/www/web1/mystuff/* }}} Now create .htaccess file inside mystuff directory {{{ sudo nano /var/www/web1/mystuff/.htaccess }}} Add following content {{{ AuthType Basic AuthName "Restricted Content" AuthUserFile /etc/apache2/.htpasswd Require valid-user }}} Now restart apache and browse to the newly created directory from your browser and check what is changed. == Enabling HTTPS with self-signed certificates == Create self-signedCertificates on to a directory '''/etc/ssl''' using openssl {{{ sudo openssl req -x509 -nodes -days 365 -newkey rsa:2048 -keyout /etc/ssl/private/apache_prv.key -out /etc/ssl/certs/apache_crt.crt }}} You will be asked series of questions, answer them carefully {{{ Country Name (2 letter code) [AU]:LK State or Province Name (full name) [Some-State]:Kandy Locality Name (eg, city) []:Peradeniya Organization Name (eg, company) [Internet Widgits Pty Ltd]:YourInst Organizational Unit Name (eg, section) []:IT Team Common Name (e.g. server FQDN orYOUR name) []:www.yourdomain.ws.learn.ac.lk Email Address []:info@yourdomain.ws.learn.ac.lk }}} Once finished, it will create two files in /etc/ssl. Next create another apacheconfig fileas web1-ssl.conf and include {{{ ServerAdmin admin@yourdomain.ws.learn.ac.lk ServerName web1.yourdomain.ws.learn.ac.lk DocumentRoot /var/www/web1 Require all granted ErrorLog ${APACHE_LOG_DIR}/error.log CustomLog ${APACHE_LOG_DIR}/access.log combined SSLEngine on SSLCertificateFile /etc/ssl/certs/apache_crt.crt SSLCertificateKeyFile /etc/ssl/private/apache_prv.key SSLOptions +StdEnvVars SSLOptions +StdEnvVars }}} Now enable this site by {{{ sudo a2enmod ssl sudo a2ensite web1-ssl.conf }}} Try browsing https://web1.yourdomain.ws.learn.ac.lk, you will be warned about the untrusted connection as it is a self-signed authentication. == Something Useful == Also as a best practice it is better to disable port 80 or plain HTTP traffic to your server. But if your directly disable Port 80 and allow only 443 then we have to manually type “https://” before your exact url in browsers. Therefore, better to redirect all HTTP traffic to port443 from your server configuration without disabling. So to do that we need to put a redirect in each virtual host conf. files. Edit port 80 virtual host configuration files and add these in bottom just before the line {{{ RewriteEngine on RewriteCond %{SERVER_NAME} = web1.yourdomain.ws.learn.ac.lk RewriteRule ^ https://%{SERVER_NAME}%{REQUEST_URI} [END,QSA,R=permanent] }}} Then enable mod-rewrite in apache and restart.. {{{ sudo a2enmod rewrite sudo systemctl reload apache2 }}} Now test your configuration by browsing to http://www.yourdomain.ws.learn.ac.lk and see how it redirects == http2 == HTTP/2 support is included in Apache 2.4.17 and upwards. Enable HTTP/2 module by executing, {{{ sudo a2enmod http2 }}} then add below to each individual ssl virtual host files to enable respectively. {{{ Protocols h2 http/1.1 }}} To enable http/2 globally you can add following to the apache.conf {{{ Protocols h2 h2c http/1.1 }}} Once those lines are added restart apache and visit https://tools.keycdn.com/http2-test to check http2 configuration. == Enable ufw(Ubuntu Firewall) == Before enabling ufw we must allow all outdoing and deny all incoming traffic as default. Also allowing ssh will be a must. {{{ sudo ufw default allow outgoing sudo ufw default deny incoming sudo ufw allow ssh }}} Then enable ufw, {{{ sudo ufw enable }}} Press y when asked: {{{ Command may disrupt existing ssh connections. Proceed with operation (y|n)? y Firewall is active and enabled on system startup }}} and try to access your server from browser. To enable port 80 and 443 we need, {{{ sudo ufw allow 80/tcp sudo ufw allow 443/tcp }}} Check UFW status by {{{ sudo ufw status sudo ufw status verbose }}} === Troubleshoot === {{{ systemctl status apache2.service journalctl –xe }}} Log files: {{{ tail –f /var/log/syslog tail –f /var/log/apache2/access.log tail –f /var/log/apache2/error.log }}} == HTTPS configuration using Let’s Encrypt == Following are some additional stuff for you to try at your own institute with your own webserver and public IP addresses. Prerequisites:To deploy Let’sEncrypt ssl certificates you must have public DNS and reachability from Internet Install letsencrypt client on the server {{{ sudo apt-get install python-letsencrypt-apache }}} Run the following to enable https for the selected domain specified with –d. {{{ sudo letsencrypt --apache -d www.yourdomain.ws.learn.ac.lk }}} During the process you will be requested to enter a valid e-mail address where it will be used to send you details of your certificate and alerts like certificate expiry. Also you will be able to pick between enabling both http and https access or forcing all requests to redirect to https. It is usually safest to require https, except you have a specific necessity for unencrypted http traffic. [[br]] If you want to enable https for other domains, then run the above with the other domain names as well. '''NOTE''': If your put several domains in single command with multiple –d flags then all those sites will be issued single ssl certificate with multiple domain names. This is useful if you want to certify a specific server name and a parent domain both at the same time. (Eg. www.learn.ac.lk , learn.ac.lk both will end up in same landing page without generating errors.) Once letsencrypt finishes, go to https://www.ssllabs.com/ssltest/analyze.html?d=www.yourdomain.ws.learn.ac.lk&latest and check https connectivity. Auto Renewal of Certificates: Let’s Encrypt certificates are normally valid for 90 days only. Therefore, we have to renew these certificates at least once every 3 months. This can be done automatically by creating a cron job in Linux to execute letsencript renew command. To edit cron Jobs {{{ sudo crontab –e }}} then it will ask for an editor. To use nano the default editor press enter. At the bottom of the page insert below and save/exit, {{{ 30 4 25 */2 * /usr/bin/letsencrypt renew >> /var/log/le-renew.log }}} Above command will execute “/usr/bin/letsencrypt renew” on 25 th day in every two months and will write the output to a file called “/var/log/le-renew.log”