Changes between Version 15 and Version 16 of pfsenseinstall


Ignore:
Timestamp:
Nov 10, 2016, 5:21:44 AM (8 years ago)
Author:
admin
Comment:

--

Legend:

Unmodified
Added
Removed
Modified

  • pfsenseinstall

    v15 v16  
    1919Start virtualbox and Click on New button (at top-right) to create new virtual machine
    2020
    21 Enter name of the VM as: '''ps'your index number'.ws.learn.ac.lk'''. You can get your index number from [wiki:ipallocation here]
     21Enter name of the VM as: '''pfsense.'your domain'.ws.learn.ac.lk'''. You can get your domain from [wiki:ipallocation here]
    2222
    2323eg:
    24  - ps1.ws.learn.ac.lk
     24 - pfsense.user1.ws.learn.ac.lk
    2525 
    2626
    … …  
    4343Make sure virtual hard disk file name in following format
    4444
    45  '''ps'your index number'.ws.learn.ac.lk'''
     45 '''pfsense.'your domain'.ws.learn.ac.lk'''
    4646
    4747adjust the disk size to '''8.0GB'''
    … …  
    6565=== Setting up boot device and Booting===
    6666
    67 Click on '''Storage''' title and select '''CD ROM icon''' under the '''Controller:IDEClick''' on CD ROM icon under the '''Attribute''' on the left side to select
     67Click on '''Storage''' title and select '''CD ROM icon''' under the '''Controller:IDE''' Click on CD ROM icon under the '''Attribute''' on the left side to select
    6868
    6969Choose '''Virtual Optical Disk File'''
    … …  
    8989After the files have been copied to the target disk, a choice is presented to select the '''Console Type'''. Standard Kernel defaults to the VGA console. Embedded Kernel  defaults to serial console. Choose '''Standard Kernel'''
    9090
    91 Now the Installation is finished So it will ask to reboot. Choose '''Reboot''' and remember to '''remove the disc''' from vm so it will not fall back to the installation (Some times your vm might hang when you remove your disk. If this happens '''Right click''' your vm ( ps'your index number'.ws.learn.ac.lk) on '''virtualbox manager''' window. Go to the '''close''' attribute and click on '''power off'''. It will shut down your vm. After it shuts down '''Right click''' your vm ( ps'your index number'.ws.learn.ac.lk) on '''virtualbox manager''' window and Click '''start'''. It will start your vm again.
     91Now the Installation is finished So it will ask to reboot. Choose '''Reboot''' and remember to '''remove the disc''' from vm so it will not fall back to the installation (Some times your vm might hang when you remove your disk. If this happens '''Right click''' your vm ( pfsense.'your domain'.ws.learn.ac.lk) on '''virtualbox manager''' window. Go to the '''close''' attribute and click on '''power off'''. It will shut down your vm. After it shuts down '''Right click''' your vm (pfsense.'your domain'.ws.learn.ac.lk) on '''virtualbox manager''' window and Click '''start'''. It will start your vm again.
    9292
    9393=== First Bootup ===
    … …  
    130130We are going to have a static IP for WAN Interface. So press '''n''' and '''enter''' to avoid pfSense to configure the interface IP by DHCP.
    131131
    132 Enter the WAN '''IP address assign''' to you and '''enter'''. Give '''subnet mask''' and '''gateway''' in the next steps. You can find your IP allocation fron the [wiki:ipallocation IP table]
     132Enter the WAN '''IP address assign''' to you and '''enter'''. Give '''subnet mask''' and '''gateway''' in the next steps. You can find your IP allocation from the [wiki:ipallocation IP table]
    133133
    134134We are going to have an IPv^ address by DHCP. Press '''y''' and '''enter''' to let pfSense get an IPv6 address
    … …  
    136136Press '''n''' and '''enter''' to disable http on WAN interface
    137137
    138 You will be promted back to main interface.
     138You will be prompted back to main interface.
    139139
    140140=== Assign LAN IP addresses ===