Changes between Version 5 and Version 6 of noc2018/agenda/PfsenseBasics

Timestamp:

Dec 4, 2018, 1:30:16 PM (5 years ago)

Author:

admin

Comment:

--

noc2018/agenda/PfsenseBasics

@@ -122 +122 @@
  - Enter the WAN '''IP address assign''' to you and '''enter'''. Give '''subnet mask''' and '''gateway''' in the next steps. You can find your IP allocation from the [wiki:noc2018/agenda/IpAllocation IP table]
 
- - We are going to have an IPv6 address by DHCP. Press '''y''' and '''enter''' to let pfSense get an IPv6 address
+ - Do the same for IPv6 address
 
  - Press '''n''' and '''enter''' to disable http on WAN interface
@@ -136 +136 @@
  - Enter the LAN Ip address as ''' 10.XY.1.254'''. Enter subnet mask as '''24'''. We are going to have this IP address as our LAN's gateway IP. Do not give any parameters to gateway on LAN. Just press enter.
 
- - We are not going to have an IPv6 address for LAN. So just Press enter.
+ - We are not going to have an IPv6 address for LAN at this point. So just Press enter.
 
  - To enable DHCP server on LAN press '''y''' and press enter
@@ -144 +144 @@
  - Press '''n''' and '''enter''' to disable http on WAN interface
 
- - You will be promt back to main interface.
+ - You will be prompt back to main interface.
 
 You have now set up both WAN and LAN IP addresses. 
@@ -185 +185 @@
     ethernets:
         enp0s3:
-            addresses: [10.XY.1.1/24, '2401:dd00:2009::10/64']
+            addresses: [10.XY.1.1/24, '2401:DD00:XXXX:WXYZ::1/64']
             dhcp4: no
             dhcp6: no
             gateway4: 10.XY.1.254
-            gateway6: 2401:dd00:2009::ffff
+            gateway6: 2401:DD00:XXXX:WXYZ::FFFF
             nameservers:
-              addresses: [10.XY.1.254, '2401:dd00:2009::ffff']
+              addresses: [10.XY.1.254, '2401:DD00:XXXX:WXYZ::FFFF']
     version: 2
 }}}