Changes between Version 8 and Version 9 of netsec2018wireshark

Timestamp:

Jun 11, 2018, 9:46:45 AM (6 years ago)

Author:

admin

Comment:

--

netsec2018wireshark

@@ -58 +58 @@
 === Captureing Packets from wireshark ===
 
-Once you open the wireshark you will get the following interface. you can select the interface that you want to capture packets clicking on the intarface listed there. Then you can click the '''Start Capture''' to capture the packets.
+Once you open the wireshark you will get the following interface. 
+[[Image(https://ws.learn.ac.lk/raw-attachment/wiki/netsec2018wireshark/welcome.png)]]
+
+You can select the interface that you want to capture packets clicking on the intarface listed there. Then you can click the '''Start Capture''' to capture the packets.
+[[Image(https://ws.learn.ac.lk/raw-attachment/wiki/netsec2018wireshark/start.png)]]
 
 You will see the packets capturing. Click the '''Stop Capture''' button when you want to stop the capturing.
+[[Image(https://ws.learn.ac.lk/raw-attachment/wiki/netsec2018wireshark/stop.png)]]
+
 
 You can save the captured packets by clicking '''File>Save as...''' and Clicking '''Save''' after you select a Location 
 
 You can change the interface and add or remove filter by clicking the '''Options''' button.
+[[Image(https://ws.learn.ac.lk/raw-attachment/wiki/netsec2018wireshark/options.png)]]
 
 === Filters ===