Monitoring Netflow Using nfdump/nfsen

You will install nfdump and nfsen in this hands-on.

install nfdump

First install dependancies

$ sudo apt-get install build-essential autoconf
$ sudo apt-get install rrdtool mrtg librrds-perl librrdp-perl librrd-dev \
       libmailtools-perl bison flex

Now proceed to download and build. Note that only the last step (make install) has to be done as root.

$ cd
$ wget http://www.ws.nsrc.org/downloads/nfdump-1.6.13.tar.gz
$ tar xvzf nfdump-1.6.13.tar.gz
$ cd nfdump-1.6.13
$ ./configure --help      # optional, shows the build settings available
$ ./configure --enable-nfprofile --enable-nftrack --enable-sflow
$ make
$ sudo make install

Router Configuration

Testing nfcapd/sfcapd and nfdump

If your institutes access router uses netflow you shloud use nfcapd. If it uses sflow you should use sfcapd. You can find your router's flow expoter from this table

For a netflow router

$ mkdir /tmp/nfcap-test $ nfcapd -E -p 9001 -l /tmp/nfcap-test ... after a while, a series of flows should be dumped on your screen.

Stop the tool with CTRL+C, then look at the contents of /tmp/nfcap-test

$ ls -l /tmp/nfcap-test You should see one or more files called nfcapd.<YEAR><MON><DAY><HR><MIN>

Process the file(s) with nfdump:

nfdump -r /tmp/nfcap-test/nfcapd.201Ywwxxyyzz | less nfdump -r /tmp/nfcap-test/nfcapd.201Ywwxxyyzz -s srcip/bytes

For a slow router

$ mkdir /tmp/sfcap-test $ sfcapd -E -p 9001 -l /tmp/sfcap-test ... after a while, a series of flows should be dumped on your screen.

Stop the tool with CTRL+C, then look at the contents of /tmp/nfcap-test

$ ls -l /tmp/sfcap-test You should see one or more files called nfcapd.<YEAR><MON><DAY><HR><MIN>

Process the file(s) with nfdump:

nfdump -r /tmp/sfcap-test/sfcapd.201Ywwxxyyzz | less nfdump -r /tmp/sfcap-test/sfcapd.201Ywwxxyyzz -s srcip/bytes

Installing and setting up NfSen

Download and compile nfsen.

$ cd
$ wget http://www.ws.nsrc.org/downloads/nfsen-1.3.6p1.tar.gz
$ tar xvzf nfsen-1.3.6p1.tar.gz
$ cd nfsen-1.3.6p1
$ perl -MCPAN -e 'install Socket6'
$ cd etc
$ cp nfsen-dist.conf nfsen.conf
$ vi nfsen.conf

Set the $BASEDIR variable

$BASEDIR = "/var/nfsen";

Set the users appropriately so that Apache can access files:

$WWWUSER = 'www-data';
$WWWGROUP = 'www-data';

Set the buffer size to something small, so that we see data quickly. You would not do this on a production system.

# Receive buffer size for nfcapd - see man page nfcapd(1)

$BUFFLEN = 2000;

Find the %sources definition, and change it to:

For a netflow router

%sources=(
'accessrtr' => {'port'=>'9001','col'=>'#0000ff','type'=>'netflow'},
 );                

For a sflow router

%sources=(
'accessrtr' => {'port'=>'9001','col'=>'#0000ff','type'=>'sflow'},
 );                

(substitute your group's router for rtrX, and either remove or comment out the existing sample sources).

Change the HTMLDIR from /var/www/nfsen/ to /var/www/html/nfsen/

$HTMLDIR    = "/var/www/html/nfsen/";

Now save and exit from the file.

Deafault rrd tool version for nfsen is 1.5 but the latest version 1.6 therefore a slight configuration is needed

vi libexec/NfSenRRD.pm

Find the rrd tool setting from 1.5 to 1.6

Create the netflow user on the system

$ sudo useradd -d /var/nfsen -G www-data -m -s /bin/false netflow

Install NfSen and start it

Change directory back to just inside the source directory:

$ cd
$ cd nfsen-1.3.6p1

Now, finally, we install:

$ sudo perl install.pl etc/nfsen.conf

Press ENTER when prompted for the path to Perl.

Install init script

In order to have nfsen start and stop automatically when the system starts, add a link to the init.d diretory pointing to the nfsen startup script:

$ sudo ln -s /var/nfsen/bin/nfsen /etc/init.d/nfsen
$ sudo update-rc.d nfsen defaults 20

Start NfSen

$ sudo service nfsen start

View flows via the web:

You can find the nfsen page here:

​http://<your IP address>/nfsen/nfsen.php

You may see a message such as:

Frontend - Backend version mismatch'''

This will go away if you reload the page, it's not a problem.

vi libexec/NfSenRRD.pm 1.5 to 1.6