Changes between Version 24 and Version 25 of ipv6vmconf


Ignore:
Timestamp:
May 14, 2017, 1:46:13 PM (7 years ago)
Author:
admin
Comment:

--

Legend:

Unmodified
Added
Removed
Modified

  • ipv6vmconf

    v24 v25  
    4141 - On '''Adapter 1''' check the '''Enable Network Adapter''' . Then change '''Attached to be''' to the '''Bridged Adapter''' and make sure the '''name''' of the interface is the same interface which you use to connect to the outside (Either Wi-Fi or Ethernet). This virtual interface will work as the WAN port of the of your virtual campus network that can be used to connect from out side.
    4242 - Click on '''Advanced''' drop down list and change the '''promiscuous mode''' to '''Allow All'''
    43  - On '''Adapter 2''' check the '''Enable Network Adapter''' . Then change '''Attached to be''' to the '''Internal Network''' and give the Name of the network as '''VLAN10'''. This virtual interface will connect to a internal virtual bridged network.
     43 - On '''Adapter 2''' check the '''Enable Network Adapter''' . Then change '''Attached to be''' to the '''Internal Network''' and give the Name of the network as '''Dept1'''. This virtual interface will connect to a internal virtual bridged network.
    4444 - Click on '''Advanced''' drop down list and change the '''promiscuous mode''' to '''Allow All'''
    45  - On '''Adapter 3''' check the '''Enable Network Adapter''' . Then change '''Attached to be to''' the '''Internal Network''' and give the Name of the network as '''VLAN20'''. This virtual interface will connect to a internal virtual bridged network.
     45 - On '''Adapter 3''' check the '''Enable Network Adapter''' . Then change '''Attached to be to''' the '''Internal Network''' and give the Name of the network as '''Dept2'''. This virtual interface will connect to a internal virtual bridged network.
    4646 - Click on '''Advanced''' drop down list and change the promiscuous mode to '''Allow All'''
    4747 - Click '''OK'''
    … …  
    6666 - Select the Dept1PC VM from left panel on Virtual box, right click and open '''Settings'''
    6767 - Click on the '''Network''' title
    68  - On '''Adapter 1''' check the '''Enable Network Adapter''' . Then change '''Attached to be''' to the '''Internal Network''' and give the Name of the network as '''VLAN10'''. This virtual interface will connect to a internal virtual bridged network.
     68 - On '''Adapter 1''' check the '''Enable Network Adapter''' . Then change '''Attached to be''' to the '''Internal Network''' and give the Name of the network as '''Dept1'''. This virtual interface will connect to a internal virtual bridged network.
    6969 - Click on '''Advaned''' drop down list and change the '''promiscuous mode''' to '''Allow All'''
    7070 - Click '''OK'''
    … …  
    8383 - Select the Dept1PC VM from left panel on Virtual box, right click and open '''Settings'''
    8484 - Click on the '''Network''' title
    85  - On '''Adapter 1''' check the '''Enable Network Adapter''' . Then change '''Attached to be''' to the '''Internal Network''' and give the Name of the network as '''VLAN20'''. This virtual interface will connect to a internal virtual bridged network.
     85 - On '''Adapter 1''' check the '''Enable Network Adapter''' . Then change '''Attached to be''' to the '''Internal Network''' and give the Name of the network as '''Dept2'''. This virtual interface will connect to a internal virtual bridged network.
    8686 - Click on '''Advaned''' drop down list and change the '''promiscuous mode''' to '''Allow All'''
    8787 - Click '''OK'''