Changes between Version 14 and Version 15 of ipv6vmconf


Ignore:
Timestamp:
May 8, 2017, 5:00:51 AM (8 years ago)
Author:
admin
Comment:

--

Legend:

Unmodified
Added
Removed
Modified

  • ipv6vmconf

    v14 v15  
    33In this Hands-on you will get a virtual campus LAN. Through out the lab session, you will configure  devices (Cisco based) in both IPv4 and IPv6. After the configurations, you will get a virtual campus network with dual stack. Each institute you represent will be given a campus LAN. Those who are represent the same institutes have to work together as a group.
    44
    5 Your virtual campus network will then be connected to the virtual PCs (VMs) and also to to real Internet that let you to see how real data  passes through your virtual campus network.
     5Your virtual campus network will then be connected to the virtual PCs (VMs) and also to to real Internet that let you to see how real data passes through your virtual campus network.
    66
    77To simulate the Campus network you will use !Dynagen/Dynamips.
    … …  
    3737 - Select the CampusLAN VM from left panel on Virtual box, right click and open '''Settings'''
    3838 - Click on the '''Network''' title
    39  - On '''Adapter 1''' check the '''Enable Network Adapter''' . Then change '''Attached to be''' to the '''Bridged Adapter''' and make sure the '''name''' of the interface is the same interface which you use to connect to the outside (Either Wi-Fi or Ethernet). This virtual interface will work as the WAN port of the of your virtual campus network (Can be connect from out side).
     39 - On '''Adapter 1''' check the '''Enable Network Adapter''' . Then change '''Attached to be''' to the '''Bridged Adapter''' and make sure the '''name''' of the interface is the same interface which you use to connect to the outside (Either Wi-Fi or Ethernet). This virtual interface will work as the WAN port of the of your virtual campus network that can be used to connect from out side.
    4040 - Click on '''Advanced''' drop down list and change the '''promiscuous mode''' to '''Allow All'''
    4141 - On '''Adapter 2''' check the '''Enable Network Adapter''' . Then change '''Attached to be''' to the '''Internal Network''' and give the Name of the network as '''VLAN10'''. This virtual interface will connect to a internal virtual bridged network.