Changes between Version 11 and Version 12 of ipv6vmconf

Timestamp:

May 8, 2017, 4:22:30 AM (7 years ago)

Author:

admin

Comment:

--

ipv6vmconf

@@ -24 +24 @@
 === Creating the VM campuslan ===
 
- - Start virtualbox and Click on '''New''' button (at top-right) to create new virtual machine
- - Enter name of the VM as '''campuslan''' 
+ - Start VirtualBox and Click on '''New''' button (at top-right) to create new virtual machine
+ - Enter name of the VM as '''CampusLAN''' 
  - Select OS Type: '''Linux'''
  - Select Version: '''Ubuntu (64-bit)'''
@@ -35 +35 @@
 ==== Setting up Network Interfaces ====
 
- - Select the campuslan VM from left panel on Virtual box, right click and open '''Settings'''
+ - Select the CampusLAN VM from left panel on Virtual box, right click and open '''Settings'''
  - Click on the '''Network''' title
  - On '''Adapter 1''' check the '''Enable Network Adapter''' . Then change '''Attached to be''' to the '''Bridged Adapter''' and make sure the '''name''' of the interface is the same interface which you use to connect to the outside (Either Wi-Fi or Ethernet). This virtual interface will work as the WAN port of the of your virtual campus network (Can be connect from out side).