Device Configuration

Now you have six inter connected devices. All those devices have no confurations in them and you have to configure them.

Remote Access

When you are working in the Virtualbox interface you can't copy and paste commands in to to that interface. You might have experienced this already. What you can do is you can remote log in to your campuslan VM.

Windows

• Download and run ​Putty
• type your campuslan VM's IP address in the hostname text box. set the port as 22
• Click open and You will ask the username and Password of your vm. Provide them and You will be able to remote login to your linux machine

Mac

• Open a terminal
• Type ssh learn@<Your campuslan VM's IP address>
• Give password and you will have a remote login to your linux machine

Log in to the the devices

In dynagen topology script you have to give a name to each device and there is a feature to assign a port to the console port of a particular device. Following are the device name and the console port number of your network setup.

Device Name	Console Port Number
AccessRt	2100
CampusCore	2200
FacACore	2300
FacBCore	2400
FacASw	2500
FacBSw	2600

You can use this port to log in to the device's console port. Use the following code

telnet localhost <console port number>

Now you have log in to your device. You can start configuring the device.

Initial Configurations

Before configure the devices for the network setup. Let's configure some initial settings in the router. If your router is boot up when you logged in you will be prompted to the following line.