== Device Configuration ==

Now you have six inter connected devices. All those devices have no confurations in them and you have to configure them. 

=== Remote Access ===

When you are working in the Virtualbox interface you can't copy and paste commands in to to that interface. You might have experienced this already. What you can do is you can remote log in to your campuslan VM.

'''Windows'''
 - Download and run ​Putty
 - type your campuslan VM's IP address in the hostname text box. set the port as 22
 - Click open and You will ask the username and Password of your vm. Provide them and You will be able to remote login to your linux machine 

'''Mac'''

 - Open a terminal
 - Type ssh learn@<Your campuslan VM's IP address>
 - Give password and you will have a remote login to your linux machine 

=== Log in to the the devices ===

In dynagen topology script you have to give a name to each device and there is a feature to assign a port to the console port of a particular device. Following are the device name and the console port number of your network setup.

||= Device Name =||= Console Port Number =||
||!AccessRt||2100||
||!CampusCore||2200||
||FacACore||2300||
||FacBCore||2400||
||FacASw||2500||
||FacBSw||2600||

You can use this port to log in to the device's console port. Use the following code
{{{
telnet localhost <console port number>
}}}
Now you have log in to your device. You can start configuring the device.

=== Initial Configurations ===
Before configure the devices for the network setup. Let's configure some initial settings in the router. If your router is boot up when you logged in you will be prompted to the following line.