= Shibboleth IdP v3.3.2 on Ubuntu Linux LTS 18.04 = Installation assumes you have already installed Ubuntu Server 18.04 with default configuration and has a public IP connectivity with DNS setup Lets Assume your server hostname as '''idp.instXY.ac.lk''' All commands are to be run as root and you may use `sudo su` to become root 1. Install the packages required: {{{ apt-get install vim default-jdk ca-certificates openssl tomcat8 apache2 ntp expat }}} 2. Modify `/etc/hosts`: {{{ vim /etc/hosts }}} {{{ 127.0.0.1 idp.instXY.ac.lk idp }}} (Replace `idp.instXY.ac.lk` with your IdP FQDN) 3. Define the costants `JAVA_HOME` and `IDP_SRC` inside `/etc/environment`: * {{{ update-alternatives --config java }}} (copy the path without /bin/java) * {{{ vim /etc/environment }}} {{{ JAVA_HOME=/usr/lib/jvm/java-11-openjdk-amd64 IDP_SRC=/usr/local/src/shibboleth-identity-provider-3.3.2 }}} * {{{ source /etc/environment }}} * {{{ export JAVA_HOME=/usr/lib/jvm/java-11-openjdk-amd64 }}} * {{{ export IDP_SRC=/usr/local/src/shibboleth-identity-provider-3.3.2 }}} 4. Configure Tomcat8 Defaults: * {{{ update-alternatives --config java }}} (copy the path without /bin/java) * {{{ update-alternatives --config javac }}} * {{{ vim /etc/default/tomcat8 }}} {{{ JAVA_HOME=/usr/lib/jvm/java-11-openjdk-amd64 ... JAVA_OPTS="-Djava.awt.headless=true -XX:+DisableExplicitGC -XX:+UseParallelOldGC -Xms256m -Xmx1g -Djava.security.egd=file:/dev/./urandom" }}} (This settings configure the memory of the JVM that will host the IdP Web Application. The Memory value depends on the phisical memory installed on the machine. On production environment Set the "'''Xmx'''" (max heap space available to the JVM) at least to '''2GB''') 5. Download the Shibboleth Identity Provider v3.3.2: * {{{ cd /usr/local/src }}} * {{{ wget http://shibboleth.net/downloads/identity-provider/3.3.2/shibboleth-identity-provider-3.3.2.tar.gz }}} * {{{ tar -xzvf shibboleth-identity-provider-3.3.2.tar.gz }}} * {{{ cd shibboleth-identity-provider-3.3.2 }}} 6. Generate Passwords for later use in the installation, You will need two password strings, ###PASSWORD-FOR-BACKCHANNEL### and ###PASSWORD-FOR-COOKIE-ENCRYPTION###''' * {{{ tr -c -d '0123456789abcdefghijklmnopqrstuvwxyz' /dev/null;echo }}} 7. Run the installer `install.sh` to install Shibboleth Identity Provider v3.3.2: * {{{ ./bin/install.sh }}} {{{ root@idp:/usr/local/src/shibboleth-identity-provider-3.3.2# ./bin/install.sh Source (Distribution) Directory(press to accept default): [/usr/local/src/shibboleth-identity-provider-3.3.2] Installation Directory: [/opt/shibboleth-idp] Hostname: [localhost.localdomain] idp.instXY.ac.lk SAML EntityID: [https://idp.instXY.ac.lk/idp/shibboleth] Attribute Scope: [localdomain] instXY.ac.lk Backchannel PKCS12 Password: ###PASSWORD-FOR-BACKCHANNEL### Re-enter password: ###PASSWORD-FOR-BACKCHANNEL### Cookie Encryption Key Password: ###PASSWORD-FOR-COOKIE-ENCRYPTION### Re-enter password: ###PASSWORD-FOR-COOKIE-ENCRYPTION### }}} >Replace `instXY.ac.lk` with your Domain Name From this point there will be a variable '''idp.home''' pointing to the directory: `/opt/shibboleth-idp` 8. Import the JST libraries to visualize the IdP `status` page: * {{{ cd /opt/shibboleth-idp/edit-webapp/WEB-INF/lib }}} * {{{ wget https://build.shibboleth.net/nexus/service/local/repositories/thirdparty/content/javax/servlet/jstl/1.2/jstl-1.2.jar }}} * {{{ cd /opt/shibboleth-idp/bin ; ./build.sh -Didp.target.dir=/opt/shibboleth-idp }}} 9. Change the owner to enable '''tomcat8''' user to access on the following directories: * {{{ chown -R tomcat8 /opt/shibboleth-idp/logs/ }}} * {{{ chown -R tomcat8 /opt/shibboleth-idp/metadata/ }}} * {{{ chown -R tomcat8 /opt/shibboleth-idp/credentials/ }}} * {{{ chown -R tomcat8 /opt/shibboleth-idp/conf/ }}} 10. Create a Certificate and a Key self-signed for HTTPS and enable secure apache web server as the front-end. '''(Skip step 10 if you are installing IDP on a production environment)''' * {{{ mkdir /root/certificates }}} * {{{ openssl req -x509 -newkey rsa:4096 -keyout /root/certificates/idp-key-server.key -out /root/certificates/idp-cert-server.crt -nodes -days 1095 }}} Then, * {{{ chmod 400 /root/certificates/idp-key-server.key }}} * {{{ chmod 644 /root/certificates/idp-cert-server.crt }}} Create the file `/etc/apache2/sites-available/idp-ssl.conf` as follows: {{{#!apache SSLStaplingCache shmcb:/var/run/ocsp(128000) ServerName idp.instXY.ac.lk:443 ServerAdmin admin@instXY.ac.lk DocumentRoot /var/www/html SSLEngine On SSLProtocol All -SSLv2 -SSLv3 -TLSv1 -TLSv1.1 SSLCipherSuite "EECDH+AESGCM:EDH+AESGCM:AES256+EECDH:AES256+EDH" SSLHonorCipherOrder on # Disable SSL Compression SSLCompression Off # OCSP Stapling, only in httpd/apache >= 2.3.3 SSLUseStapling on SSLStaplingResponderTimeout 5 SSLStaplingReturnResponderErrors off # Enable HTTP Strict Transport Security with a 2 year duration Header always set Strict-Transport-Security "max-age=63072000;includeSubDomains;preload" SSLCertificateFile /root/certificates/idp-cert-server.crt SSLCertificateKeyFile /root/certificates/idp-key-server.key #SSLCertificateChainFile /root/certificates/publicCA.crt }}} Enable '''proxy_http''', '''SSL''' and '''headers''' Apache2 modules: * {{{ a2enmod proxy_http ssl headers alias include negotiation }}} * {{{ a2ensite idp-ssl.conf }}} Configure Apache2 to redirect all on HTTPS: * {{{ vim /etc/apache2/sites-enabled/000-default.conf }}} {{{#!apache ServerName "idp.instXY.ac.lk" Redirect "/" "https://idp.instXY.ac.lk/" }}} * {{{ service apache2 restart }}} == Configure SSL on Apache2 with Letsencrypt (for Production Servers)== For tutorial purposes, implementing https was done with self-signed certificates. Therefore, please skip to '''step 14'''. 11. Disable default apache configuration: * {{{ a2dissite 000-default }}} 12. Create a new configuration file as `idp.conf` with the following: * {{{ vim /etc/apache2/site-available/idp.conf }}} {{{#!apache ServerName idp.instXY.ac.lk ServerAdmin admin@instXY.ac.lk DocumentRoot /var/www/html }}} Enable Apache2 modules: * {{{ a2enmod proxy_http ssl headers alias include negotiation }}} Restart the Apache service: * {{{ service apache2 restart }}} 13. Install Letsencrypt and enable HTTPS: * {{{ add-apt-repository ppa:certbot/certbot }}} * {{{ apt install python-certbot-apache }}} * {{{ certbot --apache -d idp.instXY.ac.lk }}} {{{ Plugins selected: Authenticator apache, Installer apache Enter email address (used for urgent renewal and security notices) (Enter 'c' to cancel): YOU@instXY.ac.lk - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Please read the Terms of Service at https://letsencrypt.org/documents/LE-SA-v1.2-November-15-2017.pdf. You must agree in order to register with the ACME server at https://acme-v02.api.letsencrypt.org/directory - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - (A)gree/(C)ancel: A - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Would you be willing to share your email address with the Electronic Frontier Foundation, a founding partner of the Let's Encrypt project and the non-profit organization that develops Certbot? We'd like to send you email about our work encrypting the web, EFF news, campaigns, and ways to support digital freedom. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - (Y)es/(N)o: Y Obtaining a new certificate Performing the following challenges: http-01 challenge for idp.instXY.ac.lk Waiting for verification... Cleaning up challenges Created an SSL vhost at /etc/apache2/sites-available/idp-le-ssl.conf Enabled Apache socache_shmcb module Enabled Apache ssl module Deploying Certificate to VirtualHost /etc/apache2/sites-available/idp-le-ssl.conf Enabling available site: /etc/apache2/sites-available/idp-le-ssl.conf Please choose whether or not to redirect HTTP traffic to HTTPS, removing HTTP access. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1: No redirect - Make no further changes to the webserver configuration. 2: Redirect - Make all requests redirect to secure HTTPS access. Choose this for new sites, or if you're confident your site works on HTTPS. You can undo this change by editing your web server's configuration. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Select the appropriate number [1-2] then [enter] (press 'c' to cancel): 2 Redirecting vhost in /etc/apache2/sites-enabled/rr3.conf to ssl vhost in /etc/apache2/sites-available/rr3-le-ssl.conf - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Congratulations! You have successfully enabled https://idp.instXY.ac.lk }}} == Configure Tomcat 8 to run as the Back-end == 14. Modify `server.xml`: * {{{ vim /etc/tomcat8/server.xml }}} Comment out the Connector 8080 (HTTP): {{{#!xml }}} Enable the Connector 8009 (AJP): {{{#!xml }}} Check the integrity of XML files just edited with: {{{ xmlwf -e UTF-8 /etc/tomcat8/server.xml }}} If the file is well-formed, xmlwf will be silent. 15. Create and change the file idp.xml: * {{{ sudo vim /etc/tomcat8/Catalina/localhost/idp.xml }}} {{{#!xml }}} 16. Create the Apache2 configuration file for IdP: * {{{ vim /etc/apache2/sites-available/idp-proxy.conf }}} {{{#!apache ProxyPreserveHost On RequestHeader set X-Forwarded-Proto "https" Require all granted ProxyPass /idp ajp://localhost:8009/idp retry=5 ProxyPassReverse /idp ajp://localhost:8009/idp retry=5 }}} 17. Enable '''proxy_ajp''' apache2 module and the new IdP site: * {{{ a2enmod proxy_ajp }}} * {{{ a2ensite idp-proxy.conf }}} * {{{ service apache2 restart }}} 18. Modify '''context.xml''' to prevent error of //lack of persistence of the session objects// created by the IdP : * {{{ vim /etc/tomcat8/context.xml }}} and remove the comment from: `` 19. Restart Tomcat8: * {{{ service tomcat8 restart }}} 20. Verify if the IdP works by opening this page on your browser: * {{{ https://idp.instXY.ac.lk/idp/shibboleth }}} (you should see the IdP metadata) == Speed up Tomcat 8 startup == 21. Find out the JARs that can be skipped from the scanning: * {{{ cd /opt/shibboleth-idp/ }}} * {{{ ls webapp/WEB-INF/lib | awk '{print $1",\\"}' }}} Insert the output list into `/etc/tomcat8/catalina.properties` at the tail of the variable ` tomcat.util.scan.StandardJarScanFilter.jarsToSkip `. Make sure to include the `,\` symbols at the end of the existing value when inserting. Restart Tomcat 8: * {{{ service tomcat8 restart }}} == Configure Shibboleth Identity Provider v3.2.1 to release the persistent-id (Stored mode) == 22. Test IdP by opening a terminal and running these commands: * {{{ cd /opt/shibboleth-idp/bin }}} * {{{ ./status.sh }}} (You should see some informations about the IdP installed) 23. Install '''MySQL Connector Java''' and other useful libraries used by Tomcat for MySQL DB (if you don't have them already): * {{{ apt-get install mysql-server libmysql-java libcommons-dbcp-java libcommons-pool-java }}} * {{{ cd /usr/share/tomcat8/lib/ }}} * {{{ ln -s ../../java/mysql.jar mysql-connector-java.jar }}} * {{{ ln -s ../../java/commons-pool.jar commons-pool.jar }}} * {{{ ln -s ../../java/commons-dbcp.jar commons-dbcp.jar }}} * {{{ ln -s ../../java/tomcat-jbcp.jar tomcat-jbcp.jar }}} Ignore if you get errors for some of the `ln` commands as the files might be already there. 24. Rebuild the '''idp.war''' of Shibboleth with the new libraries: * {{{ cd /opt/shibboleth-idp/ ; ./bin/build.sh }}} You may need to press enter on `Installation Directory: [/opt/shibboleth-idp]` 25. Create and prepare the "'''shibboleth'''" MySQL DB to host the values of the several '''persistent-id''' and '''!StorageRecords''' MySQL DB to host other useful information about user consent: * {{{ mysql_secure_installation }}} This will add additional security to your database engine. For the tutorial purposes we will use '''Iam@2018''' as passwords. Remember the capital '''I'''. {{{ Securing the MySQL server deployment. Connecting to MySQL using a blank password. VALIDATE PASSWORD PLUGIN can be used to test passwords and improve security. It checks the strength of password and allows the users to set only those passwords which are secure enough. Would you like to setup VALIDATE PASSWORD plugin? Press y|Y for Yes, any other key for No: y There are three levels of password validation policy: LOW Length >= 8 MEDIUM Length >= 8, numeric, mixed case, and special characters STRONG Length >= 8, numeric, mixed case, special characters and dictionary file Please enter 0 = LOW, 1 = MEDIUM and 2 = STRONG: 1 Please set the password for root here. New password:Iam@2018 Re-enter new password:Iam@2018 Estimated strength of the password: 50 Do you wish to continue with the password provided?(Press y|Y for Yes, any other key for No) : y By default, a MySQL installation has an anonymous user, allowing anyone to log into MySQL without having to have a user account created for them. This is intended only for testing, and to make the installation go a bit smoother. You should remove them before moving into a production environment. Remove anonymous users? (Press y|Y for Yes, any other key for No) : y Success. Normally, root should only be allowed to connect from 'localhost'. This ensures that someone cannot guess at the root password from the network. Disallow root login remotely? (Press y|Y for Yes, any other key for No) : y Success. By default, MySQL comes with a database named 'test' that anyone can access. This is also intended only for testing, and should be removed before moving into a production environment. Remove test database and access to it? (Press y|Y for Yes, any other key for No) : y - Dropping test database... Success. - Removing privileges on test database... Success. Reloading the privilege tables will ensure that all changes made so far will take effect immediately. Reload privilege tables now? (Press y|Y for Yes, any other key for No) : y Success. All done! }}} * log in to your MySQL Server with `mysql -u root -p` and continue.For your production servers, Make sure to replace passwords `Iam@2018`. When creating passwords you should consider your password policy selected above. {{{#!mysql SET NAMES 'utf8'; SET CHARACTER SET utf8; CREATE DATABASE IF NOT EXISTS shibboleth CHARACTER SET=utf8; GRANT ALL PRIVILEGES ON shibboleth.* TO root@localhost IDENTIFIED BY 'Iam@2018'; GRANT ALL PRIVILEGES ON shibboleth.* TO shibbo@localhost IDENTIFIED BY 'Iam@2018'; FLUSH PRIVILEGES; USE shibboleth; CREATE TABLE IF NOT EXISTS shibpid ( localEntity VARCHAR(255) NOT NULL, peerEntity VARCHAR(255) NOT NULL, persistentId VARCHAR(50) NOT NULL, principalName VARCHAR(50) NOT NULL, localId VARCHAR(50) NOT NULL, peerProvidedId VARCHAR(50) NULL, creationDate TIMESTAMP NOT NULL default CURRENT_TIMESTAMP on update CURRENT_TIMESTAMP, deactivationDate TIMESTAMP NULL default NULL, PRIMARY KEY (localEntity, peerEntity, persistentId) ); CREATE TABLE IF NOT EXISTS StorageRecords ( context VARCHAR(255) NOT NULL, id VARCHAR(255) NOT NULL, expires BIGINT(20) DEFAULT NULL, value LONGTEXT NOT NULL, version BIGINT(20) NOT NULL, PRIMARY KEY (context, id) ); quit }}} * Restart mysql service: `service mysql restart` 26. Enable the generation of the `persistent-id` : * First you need to generate a password salt. Keep a copy of the output of following as your '''idp.persistentId.salt''' {{{ openssl rand -base64 36 }}} * Edit the following file and modify the lines containing below variables. {{{ vim /opt/shibboleth-idp/conf/saml-nameid.properties }}} (the //sourceAttribute// used in the configuration MUST BE an ldap attribute, or a list of comma-separated attributes, that uniquely identify the subject of the generated `persistent-id`. It MUST BE: '''Stable''', '''Permanent''' and '''Not-reassignable''') {{{ idp.persistentId.sourceAttribute = uid ... idp.persistentId.salt = Replace_these_with_your_salt_generated_earlier ... idp.persistentId.generator = shibboleth.StoredPersistentIdGenerator ... idp.persistentId.dataSource = MyDataSource ... idp.persistentId.computed = shibboleth.ComputedPersistentIdGenerator }}} * Enable the '''SAML2PersistentGenerator''': * {{{ vim /opt/shibboleth-idp/conf/saml-nameid.xml }}} Remove the comment from the line containing: {{{#!xml }}} * {{{ vim /opt/shibboleth-idp/conf/c14n/subject-c14n.xml }}} Remove the comment to the bean called "'''c14n/SAML2Persistent'''". {{{#!xml }}} 27. Enable '''JPAStorageService''' for the '''!StorageService''' of the user consent: * `vim /opt/shibboleth-idp/conf/global.xml` and add this piece of code to the tail before the ending : {{{#!xml }}} > You may need to change the '''password''' for your "'''shibboleth'''" DB in production servers) * Modify the IdP configuration file: * {{{ vim /opt/shibboleth-idp/conf/idp.properties }}} {{{ idp.session.StorageService = shibboleth.JPAStorageService idp.consent.StorageService = shibboleth.JPAStorageService idp.replayCache.StorageService = shibboleth.JPAStorageService idp.artifact.StorageService = shibboleth.JPAStorageService # Track information about SPs logged into idp.session.trackSPSessions = true # Support lookup by SP for SAML logout idp.session.secondaryServiceIndex = true }}} (This will indicate to IdP to store the data collected by User Consent into the "'''!StorageRecords'''" table) 28. Connect the openLDAP to the IdP to allow the authentication of the users: * use `openssl x509 -outform der -in /etc/ssl/certs/ldap_server.pem -out /opt/shibboleth-idp/credentials/ldap-server.crt` to load the ldap certificate. If you host ldap in a seperate machine, copy the ldap_server.crt to `/opt/shibboleth-idp/credentials` * {{{#!sh vim /opt/shibboleth-idp/conf/ldap.properties }}} * Solution 1: LDAP + STARTTLS: (We recommend continuing with this option) {{{ idp.authn.LDAP.authenticator = bindSearchAuthenticator idp.authn.LDAP.ldapURL = ldap://idp.instXY.ac.lk:389 idp.authn.LDAP.useStartTLS = true idp.authn.LDAP.useSSL = false idp.authn.LDAP.sslConfig = certificateTrust idp.authn.LDAP.trustCertificates = %{idp.home}/credentials/ldap-server.crt #idp.authn.LDAP.trustStore = %{idp.home}/credentials/ldap-server.truststore idp.authn.LDAP.returnAttributes = * idp.authn.LDAP.baseDN = ou=people,dc=instXY,dc=ac,dc=lk idp.authn.LDAP.userFilter = (uid={user}) idp.authn.LDAP.bindDN = cn=admin,dc=instXY,dc=ac,dc=lk idp.authn.LDAP.bindDNCredential = ###LDAP_ADMIN_PASSWORD### idp.authn.LDAP.dnFormat = uid=%s,ou=people,dc=instXY,dc=ac,dc=lk idp.attribute.resolver.LDAP.trustCertificates = %{idp.authn.LDAP.trustCertificates:undefined} idp.attribute.resolver.LDAP.returnAttributes = %{idp.authn.LDAP.returnAttributes} }}} * Solution 2: plain LDAP {{{ idp.authn.LDAP.authenticator = bindSearchAuthenticator idp.authn.LDAP.ldapURL = ldap://idp.instXY.ac.lk:389 idp.authn.LDAP.useStartTLS = false idp.authn.LDAP.useSSL = false idp.authn.LDAP.returnAttributes = * idp.authn.LDAP.baseDN = ou=people,dc=instXY,dc=ac,dc=lk idp.authn.LDAP.userFilter = (uid={user}) idp.authn.LDAP.bindDN = cn=admin,dc=instXY,dc=ac,dc=lk idp.authn.LDAP.bindDNCredential = ###LDAP_ADMIN_PASSWORD### idp.authn.LDAP.dnFormat = uid=%s,ou=people,dc=instXY,dc=ac,dc=lk idp.attribute.resolver.LDAP.returnAttributes = %{idp.authn.LDAP.returnAttributes} }}} (If you decide to use the Solution 2, you have to remove (or comment out) the following code from your Attribute Resolver file: {{{#!xml }}} * utility to ldap searching: `ldapsearch -H ldap:// -x -b "dc=instXY,dc=ac,dc=lk" -LLL dn` * the baseDN ==> `ou=people, dc=instXY,dc=ac,dc=lk` (branch containing the registered users) * the bindDN ==> `cn=admin,dc=instXY,dc=ac,dc=lk` (distinguished name for the user that can made queries on the LDAP) 29. Enrich IDP logs with the authentication error occurred on LDAP: * {{{ vim /opt/shibboleth-idp/conf/logback.xml }}} {{{#!xml }}} 30. Build the '''attribute-resolver.xml''' to define which attributes your IdP can manage. Here you can find the '''attribute-resolver-v1-LEARN.xml''' provided by LEARN: * Download the attribute resolver provided by LEARN: {{{ wget https://fr-training.ac.lk/attribute-resolver-LEARN.xml -O /opt/shibboleth-idp/conf/attribute-resolver-LEARN.xml }}} * Modify `services.xml` file: `vim /opt/shibboleth-idp/conf/services.xml` {{{#!xml %{idp.home}/conf/attribute-resolver.xml }}} must become: {{{#!xml %{idp.home}/conf/attribute-resolver-LEARN.xml }}} * Restart Tomcat8: `service tomcat8 restart` 31. Enable the SAML2 support by changing the `idp-metadata.xml` and disabling the SAML v1.x deprecated support: * {{{ vim /opt/shibboleth-idp/metadata/idp-metadata.xml }}} {{{#!xml SECTION: – From the list of "protocolSupportEnumeration" remove: - urn:oasis:names:tc:SAML:1.1:protocol - urn:mace:shibboleth:1.0 - On include Institute XY Enter a description of your IdP https://idp.instXY.ac.lk/logo.png https://idp.instXY.ac.lk/logo16.png - Upload example png files to /var/srv/html as logo.png with 80x60 pixel and logo16.png with 16x16 pixel images. – Remove the endpoint: (and modify the index value of the next one to “1”) - Remove the endpoint: - Remove all ":8443" from the existing URL (such port is not used anymore) - Uncomment SingleLogoutService: Section: – From the list "protocolSupportEnumeration" replace the value of: - urn:oasis:names:tc:SAML:1.1:protocol with - urn:oasis:names:tc:SAML:2.0:protocol - Remove the comment from: - Remove the endpoint: - Remove all ":8443" from the existing URL (such port is not used anymore) - Finally remove all commented content }}} 32. Obtain your IdP metadata here: * {{{ https://idp.instXY.ac.lk/idp/shibboleth }}} 33. Register you IdP on the test Federation: * {{{ https://fr-training.ac.lk/ }}} > For production enviornments please use `https://fr.ac.lk`, Also make sure to remove `-training` from all urls. * When Applying for the membership of the federation the form will ask lot of questions to identify your service. Therefore, answer all of them as per the following, * On the IDP registration page start with pasting the whole xml metadata from `https://idp.instXY.ac.lk/idp/shibboleth` and click next. * If you have correctly entered metadata you will be asked to select a Federation. * Select "Federation for Testing" * Fill in your contact Details * Go to Organization tab and Fill in all details for language English(en) by clicking "Add in new language" button * Name of organization: Institute XY * Displayname of organization: Institute XY * URL: https://www.instXY.ac.lk * Go to Contacts tab and add at least "Support" and "Technical" contacts * On UI Information tab you will see some data extracted from metadata. Apart from those fill-in the rest * Keywords: university or research * For the tutorial put some dummy URL data for Information and Privacy Policy. But in production, you may have to provide your true data * On UI Hints tab you may add your DNS Domain as instXY.ac.lk. Also you may specify your IP blocks or Location * on SAML tab, tick the following on IDPSSODescriptor and AttributeAuthorityDescriptor sections as Supported Name Identifiers * urn:oasis:names:tc:SAML:2.0:nameid-format:persistent * On Certificates tab, make sure it contains Certificate details, if not start Over by reloading IDP's metadata and pasting them. * Finally click Register. * Your Federation operator will review your application and will proceed with the registration 34. Configure the IdP to retrieve the Federation Metadata: * {{{ cd /opt/shibboleth-idp/conf }}} * {{{ vim metadata-providers.xml }}} {{{#!xml md:SPSSODescriptor }}} * Retrive the Federation Certificate used to verify its signed metadata: * `wget https://fr-training.ac.lk/metadata-signer -O /opt/shibboleth-idp/metadata/federation-cert.pem` 35. Reload service with id `shibboleth.MetadataResolverService` to retrieve the Federation Metadata: * {{{ cd /opt/shibboleth-idp/bin }}} * {{{ ./reload-service.sh -id shibboleth.MetadataResolverService }}} 36. The day after the Federation Operators approve you, check if you can login with your IdP on the following services: * https://sp-training.ac.lk/secure (Service Provider provided for testing the LEARN Training Federation) * https://sp-test.learn.ac.lk/secure (Service Provider provided for testing the LEARN Production Federation) == Configure Attribute Filters to release the mandatory attributes to the default LEARN Resources: == 37. Make sure that you have the "`tmp/httpClientCache`" used by "`shibboleth.FileCachingHttpClient`": * {{{ mkdir -p /opt/shibboleth-idp/tmp/httpClientCache ; chown tomcat8 /opt/shibboleth-idp/tmp/httpClientCache }}} 38. Modify your `services.xml`: * {{{ vim /opt/shibboleth-idp/conf/services.xml }}} {{{#!xml ... %{idp.home}/conf/attribute-filter.xml }}} 39. Reload service with id `shibboleth.AttributeFilterService` to refresh the Attribute Filter followed by the IdP: * {{{ cd /opt/shibboleth-idp/bin }}} * {{{ ./reload-service.sh -id shibboleth.AttributeFilterService }}} == Customization and Branding == The default install of the IdP login screen will display the Shibbolethlogo, a default prompt for username and password, and text saying that this screen should be customized. It is recommand to customize this page to have the proper institution logo and name. To give a consistent professional look, institution may customize the graphics to match the style of their, * login pages * onsent pages * logout pages * error pages Those pages are created as Velocity template under `/opt/shibboleth-idp/views` Therefore, it is recommended to customize the Velocity pages, adding supplementary images and CSS files as needed Also the Velocity templates can be configured through message properties defined in message property files on `/opt/shibboleth-idp/system/messages/messages.properties` '''which should NOT be modified''' because of that, any customizations should be inserted into `/opt/shibboleth-idp/messages/messages.properties` least configurations: `idp.title` - HTML TITLE to use across all of the IdP page templates. We recommend settings this to something like University of Example Login Service `idp.logo` - relative path to the logo to render on the templates. E.g., /images/logo.jpg. The logo image has to be installed into /opt/shibboleth-idp/edit-webapp/images and the web application WAR file has to be rebuilt with /opt/shibboleth-idp/bin/build.sh `idp.logo.alt-text` - the ALT text for your logo. Should be changed from the default value (where the text asks for the logo to be replaced). `idp.footer` - footer that displays on (almost) all pages. `root.footer` - footer that displays on some error pages. Eg: {{{ idp.title = University of Example Login Service idp.logo = /images/logo.jpg idp.logo.alt-text = University of Example logo idp.footer = Copyright University of Example root.footer = Copyright University of Example }}} Depending on branding requirements, it may be sufficient to edit the CSS files in /opt/shibboleth-idp/edit-webapp/css, or it may be necessary to start editing the template pages. Please note that the login page and most other pages use /opt/shibboleth-idp/edit-webapp/css/main.css, the consent module uses /opt/shibboleth-idp/edit-webapp/css/consent.css with different element names. Besides the logo, the login page (and several other pages) display a toolbox on the right with placeholders for links to password-reset and help-desk pages, these can be customized by adding following to the `/opt/shibboleth-idp/messages/messages.properties` {{{ idp.url.password.reset = http://helpdesk.instXY.ac.lk/ChangePassword/ idp.url.helpdesk = http://help.instXY.ac.lk/ }}} Alternatively, it is also possible to hide the whole toolbox (the whole element) from all of the relevant pages (essentially, login.vm and all (three) logout pages: logout.vm, logout-complete.vm and logout.propagate). This can be easily done by adding the following CSS snippet into /opt/shibboleth-idp/edit-webapp/css/main.css: {{{ .column.two { display: none; } }}} For your simplisity in developing, temporary add the following to Apache idp.conf file ( /etc/apache2/sites-available/idp.conf ) to server the requests directly by Apache (avoiding going through Tomcat and thus avoiding having to rebuild the WAR file after every change):insert the following right above the '''ProxyPass /idp''' directive: {{{ ProxyPass /idp/images ! ProxyPass /idp/css ! Alias /idp/images /opt/shibboleth-idp/edit-webapp/images Alias /idp/css /opt/shibboleth-idp/edit-webapp/css }}} And, as default permissions on Apache 2.4 are more restrictive, grant also explicitly access to the /opt/shibboleth-idp/edit-webapp directory: insert this at the very top of /etc/httpd/conf.d/idp.conf: {{{ Require all granted }}} When done with changes to the images and css directories, remember to rebuild the WAR file and restart Tomcat: {{{ /opt/shibboleth-idp/bin/build.sh service tomcat restart }}} Then remove the temporary additions on idp.conf and restart the apache service. == Appendix: Useful logs to find problems == 1. Tomcat 8 Logs: * {{{ cd /var/log/tomcat8 }}} * {{{ tail catalina.out }}} 2. Shibboleth IdP Logs: * {{{ cd /opt/shibboleth-idp/logs }}} * '''Audit Log:''' `tail idp-audit.log' * '''Consent Log:''' `tail idp-consent-audit.log` * '''Warn Log:''' `tail idp-warn.log` * '''Process Log:''' `tail idp-process.log`