= Campus Network Design - Network Setup = In this exercise you will install Smokeping and get it to monitor various devices in the class network. Since most of the tasks in this exercise require you to be "root", the first thing you should do is to connect to your PC and start a root shell. {{{ $ sudo -s # }}} === Install Smokeping === Before we install Smokeping we have to update our OS and install Apache web server. {{{ # apt update # apt upgrade # apt install apache2 # systemctl start apache2 # systemctl enable apache2 }}} Now we will continue with the Smokeping installation. {{{ # apt install smokeping # chmod u+s /usr/bin/fping # a2enmod cgi # systemctl reload apache2 }}} === Initial Configuration === Let's make sure that your web server and Smokeping are running: {{{ # systemctl start apache2 # systemctl enable smokeping # systemctl start smokeping }}} Then point your web browser at: {{{ http://hostX/smokeping/smokeping.cgi }}} (replace "hostX" with your own host/IP) to check that it is running. Files that are associated with Smokeping can accessed as follows; {{{ # cd /etc/smokeping/config.d # ls -l -rwxr-xr-x 1 root root 578 2022-02-26 01:55 Alerts -rwxr-xr-x 1 root root 237 2022-02-26 01:55 Database -rwxr-xr-x 1 root root 413 2022-02-26 05:40 General -rwxr-xr-x 1 root root 271 2022-02-26 01:55 pathnames -rwxr-xr-x 1 root root 859 2022-02-26 01:55 Presentation -rwxr-xr-x 1 root root 116 2022-02-26 01:55 Probes -rwxr-xr-x 1 root root 155 2022-02-26 01:55 Slaves -rwxr-xr-x 1 root root 8990 2022-02-26 06:30 Targets }}} The files that you'll need to change, at a minimum, are: * Alerts * General * Probes (to be done later) * Targets Now open the General file (note the first capital letter) {{{ # vim General }}} (you can replace "vim" with "nano" or "vi" if you like) Change the following lines according to your institute: {{{ owner = NOC contact = sysadm@localhost mailhost = localhost cgiurl = http://localhost/smokeping/smokeping.cgi # specify this to get syslog logging syslogfacility = local5 }}}