Ansible Lab

In this lab, you will install and use Ansible to install MySQL/MariaDB and create database remotely.

Requirements:

Participants are requested to have a computer with Windows 8/10/11 (8GB RAM, 25GB free disk space) with Virtualbox (version 6 or higher) hypervisor and PuTTY installed.

In Virtualbox, correct 'Extension pack' should be installed.

Virtual Machine (VM) Setup

Download VM from the following Link.

​https://docs.learn.ac.lk/index.php/s/YcojJ2544b40Zw4

Import the VM to Virtualbox.

Username and Password: docker

May have to create Virtualbox Host-Only Network Adapter

File > Host Network Manager > Create

Test internet connectivity.

This setup needs 3 VMs (one as control node and the others will be managed nodes). Import the same VM image and setup 3 VMs accordingly.

Login and check IP addresses of all VMs.

ip add

If they are same, then change them accordingly. You may disable dhcp and assign static IP addresses according to your setups.

vi /etc/netplan/00-installer-config.yaml
 enp0s8:
      addresses : [192.168.56.105/24]
:wq
netplan apply

Login using PuTTY.

Setup Network

Connect all VMs to 'Internal Network'.

Settings > Network > Adpater 3

Find the 'Internal Network' network interface.

ip add

Edit network configurations of VMs according to your setups.

vi /etc/netplan/00-installer-config.yaml
 enp0s9:
      addresses : [10.1.1.1/24]
:wq
netplan apply

Repeat the above steps in each machine accordingly and test the network connectivity.

Setup Nodes

In control node

Login as root to the node.

Change the hostname.

hostnamectl set-hostname controlnode
nano /etc/hosts

127.0.0.1 localhost
127.0.1.1 controlnode

reboot

Install Ansible

apt install ansible

In each managed node

Login as root to the node and change hostname. Each should have a unique hostname.

hostnamectl set-hostname m1
nano /etc/hosts

127.0.0.1 localhost
127.0.1.1 m1

reboot

Setup Passwordless SSH

Login to control node as normal user.

ssh-keygen -t rsa

Continue by entering the prompts.

Copy the ssh keys (the output of the above command) generated on the control node, to both managed nodes.

ssh-copy-id docker@<managed node internal network IP address>

Verify passwordless ssh from control node to other nodes.

ssh docker@<managed node internal network IP address>

Add the managed nodes to control node Ansible hosts file

Login to the control node.

nano inventory

Insert the managed nodes' internal network IP addresses to the file according to your setting. And save it.

10.1.1.2
10.1.1.3

Verify connectivity

ansible all -i inventory -m ping

Output should be similar to the following.

10.1.1.2 | SUCCESS => {
    "ansible_facts": {
        "discovered_interpreter_python": "/usr/bin/python3"
    },
    "changed": false,
    "ping": "pong"
}
10.1.1.3 | SUCCESS => {
    "ansible_facts": {
        "discovered_interpreter_python": "/usr/bin/python3"
    },
    "changed": false,
    "ping": "pong"
}

Create the Playbook - In control node - As root

nano <playbook name>.yml

- name: setup mysql
  hosts: all
  become: yes
  gather_facts: false
  vars:
    root_password: Redact#12
    db_name: new
    user_name: newuser
    user_password: Redact#13
  tasks:
    - name: Update
      shell:  apt update

    - name: install python, pip etc
      shell: apt-get -y install "{{ item }}"
      with_items:
        - pip
        - python3-dev
        - default-libmysqlclient-dev
        - build-essential

    - name: Install MySQL server
      shell: apt-get -y install mysql-server

    - name: Install MySQL client
      shell: apt-get -y install mysql-client

    - name: pip install mysqlclient
      shell: pip install mysqlclient

    - name: Start the MySQL service
      action: service name=mysql state=started

    - name: copy .my.cnf file with root password credentials
      template: src=/home/docker/my.cnf.j2 dest=/root/.my.cnf owner=root mode=0600

    - name: update mysql root password for all root accounts
      mysql_user:
        name: root
        host: localhost
        password: "{{ root_password }}"

    - name: Create database
      shell: mysql -u root -p{{ root_password }} -e 'CREATE DATABASE IF NOT EXISTS {{ db_name }};'

    - name: Create user
      shell: mysql -u root -p{{ root_password }} -e "CREATE USER '{{ user_name }}'@'%' IDENTIFIED BY '{{ user_password }}';"

    - name: Grant permissions
      shell: mysql -u root -p{{ root_password }} -e "GRANT SELECT,INSERT,UPDATE,DELETE,CREATE,CREATE TEMPORARY TABLES,DROP,INDEX,ALTER ON {{ db_name }}.* TO '{{ user_name }}'@'%';"

    - name: Reload privileges
      shell: mysql -u root -p{{ root_password }} -e "FLUSH PRIVILEGES;"

Create template

nano my.cnf.j2

[client]
user=root
password={{ root_password }}

Run the Playbook - In control node - As root

ansible-playbook --ask-become-pass -i inventory <playbook name>.yml 

Give the managed VM password (only one password as the VMs have the same password) when prompted.

You will get a similar output as following upon successful completion of the plays. Troubleshoot if there are errors.

PLAY [setup mysql] ************************************************************************************************************************************************************************************************

TASK [Update] *****************************************************************************************************************************************************************************************************
changed: [10.1.1.3]
changed: [10.1.1.2]

TASK [install python, pip etc] ************************************************************************************************************************************************************************************
changed: [10.1.1.2] => (item=pip)
changed: [10.1.1.2] => (item=python3-dev)
changed: [10.1.1.2] => (item=default-libmysqlclient-dev)
changed: [10.1.1.2] => (item=build-essential)
[WARNING]: Consider using the apt module rather than running 'apt-get'.  If you need to use command because apt is insufficient you can add 'warn: false' to this command task or set 'command_warnings=False' in
ansible.cfg to get rid of this message.
changed: [10.1.1.3] => (item=pip)
changed: [10.1.1.3] => (item=python3-dev)
changed: [10.1.1.3] => (item=default-libmysqlclient-dev)
changed: [10.1.1.3] => (item=build-essential)

TASK [Install MySQL server] ***************************************************************************************************************************************************************************************
changed: [10.1.1.2]
changed: [10.1.1.3]

TASK [Install MySQL client] ***************************************************************************************************************************************************************************************
changed: [10.1.1.3]
changed: [10.1.1.2]

TASK [pip install mysqlclient] ************************************************************************************************************************************************************************************
changed: [10.1.1.2]
changed: [10.1.1.3]

TASK [Start the MySQL service] ************************************************************************************************************************************************************************************
ok: [10.1.1.3]
ok: [10.1.1.2]

TASK [copy .my.cnf file with root password credentials] ***********************************************************************************************************************************************************
changed: [10.1.1.3]
changed: [10.1.1.2]

TASK [update mysql root password for all root accounts] ***********************************************************************************************************************************************************
changed: [10.1.1.3]
changed: [10.1.1.2]

TASK [Create database] ********************************************************************************************************************************************************************************************
changed: [10.1.1.3]
changed: [10.1.1.2]

TASK [Create user] ************************************************************************************************************************************************************************************************
changed: [10.1.1.3]
changed: [10.1.1.2]

TASK [Grant permissions] ******************************************************************************************************************************************************************************************
changed: [10.1.1.2]
changed: [10.1.1.3]

TASK [Reload privileges] ******************************************************************************************************************************************************************************************
changed: [10.1.1.2]
changed: [10.1.1.3]

PLAY RECAP ********************************************************************************************************************************************************************************************************
10.1.1.2                   : ok=12   changed=11   unreachable=0    failed=0    skipped=0    rescued=0    ignored=0
10.1.1.3                   : ok=12   changed=11   unreachable=0    failed=0    skipped=0    rescued=0    ignored=0

Verify results - In managed nodes

mysql -u newuser -pRedact#13
show databases;