Changes between Version 4 and Version 5 of Cnbp2022/Agenda/pfSenseSetup

Timestamp:

Mar 24, 2022, 12:04:52 AM (3 years ago)

Author:

geethike

Comment:

--

Cnbp2022/Agenda/pfSenseSetup

@@ -23 +23 @@
 
 === Assign WAN IP addresses ===
-    • To change the interface IP address press '''2''' and '''enter''' 
-    • WAN IP is set by DHCP by default. To change the WAN interface IP Address press '''1''' and '''enter'''. 
-    • We are going to have a static IP for WAN Interface. So press n and enter to avoid pfSense to configure the interface IP by DHCP. 
-    • Enter the '''WAN IP address''' assigned to you as '''192.248.7.PQ''' and enter. Give a subnet mask as '''24''' and gateway in the next steps. You can find your IP allocation from the [wiki:Cnbp2019/Agenda/IpAllocation IP table], WANv4 gateway for the lab is '''192.248.7.254'''
-    • Next, you will be asked to configure WAN Ipv6 address via DHCP. Press '''n''' and enter to avoid DHCP address. 
-    • In the next step enter the Ipv6 address of WAN interface. Enter '''2401:dd00:2000::ffXY''' as your WAN Ipv6 address and '''64''' as subnet mask. In the next step enter WANv6 gateway for lab as '''2401:dd00:2000::ffff'''
-    • Press '''n''' and enter to disable http on WAN interface 
-    • You will be prompted back to main interface after pressing '''Enter''' when it prompts. 
+        • WAN IP is set by DHCP by default. It will get an IP from your home router.
 
 === Assign DMZ IP addresses ===
@@ -80 +73 @@
 === Switch the LAN interface to back to DMZ ===
 
-Now we have assigned the em1 interface to pfSense LAN interface. Since we can now login to pfSense web configurator through host machine we will again switch LAN and DMZ networks. In order to do that we have to Rename LAN interface to DMZ. Now Login to pfSense through host machine using WAN IP address.
+Now we have assigned the em1 interface to pfSense LAN interface. Since we can now login to pfSense web configurator through host machine we will again switch LAN and DMZ networks. In order to do that we have to Rename LAN interface to DMZ. Now Login to pfSense through host machine using DMZ IP address.
 Go to Interfaces -> LAN
 Change the description LAN to DMZ. Save and apply changes.